Calibration Tools

Anti-Corrosive Digital Vacuum Gauge with Power Supply - Up to 1E-4 Torr - EQ-CVM-211-P-LD

Anti-Corrosive Digital Vacuum Gauge with Power Supply - Up to 1E-4 Torr - EQ-CVM-211-P-LD

기본 정보
Product Name Anti-Corrosive Digital Vacuum Gauge with Power Supply - Up to 1E-4 Torr - EQ-CVM-211-P-LD
Sale Price Call for Price
Product Code EQ-CVM-211-P-LD
Quantity 수량증가수량감소
상품 옵션
 
  •  Personalization
Zero Point Calibration* Item Number
No, I do not need EQ-CVM-211-P-LD
Yes, I need (+   )
* denotes required field
  • The EQ-CVM-211 Stinger module provides the basic signal conditioning required to turn a convection vacuum gauge into a complete measuring instrument.    A built-in display provides a convenient user interface for setup and operation of the vacuum gauge.    Its platinum plated tungsten sensor wire can resist most of aggresive gases such as H2S, Ammonia, HCl, etc. (Note : This is a NEW Anti-corrosive version, available since Dec. 2013)
  •  SPECIFICATIONS
  • Features
  • Convection enhanced Pirani vacuum gauge module with on-board controller.
    Wide measurement range 10-4 to 1000 Torr.
    Bright LED digital display with measurement unit torr /mtorr
    Includes built-in digital display, set-point relay, analog output.
    Small Foot-Print. with 1/8"NPT fitting -- 48 mm diameter in front face x 104 mm Length
    9 pins D connector
    Low cost, plug-compatible direct drop-in replacement for the most basic Granville-Phillips Mini-Convectron® models
    Anti-corrosive version is available at extra cost
  • Input Voltage for
    Power Adaptor
  • 110 V ~ 220 V
  • Working Voltage for
    the Gauge
  • 11 to 30 Vdc, protected against power reversal, transients, and over-voltages
  • Output
  • 1)  log-linear 1 to 8 Vdc , 1V/decade, or
    2)  non-linear analog S-curve 0.375 to 5.659 Vdc (Helix/GP compatible)
  • Measurement Range (signal)
  • 1 x 10E-4 to 1000 Torr
    1 x 10e-4 to 1333 mbar
    1 x 10E-2Pa to 133 kPa
  • Display
  • 3 digit LED (3 digits from 999 Torr to 10.0 mTorr),
    (2 digit LED from 9.9 mTorr to 1.0 mTorr), (1 digit LED from 0.9 mTorr to 0.1 mTorr)
  • Materials Exposed to Gases
  • Anti-corrosive Version: Platinum-plated tungsten
  • Operating Temperature
  • 0 to +40ºC
  • Digital Vacuum Gauge Dimensions
  • Digital Vacuum Gauge on Vacuum Sealed Flange
  • Applicaton Notes
  • One 1/8"NPT-1/4"M14 adaptor is included to connect all MTI tube furnace
    One 12V 500 mA Dc power and RS232 connector ( 9 pin D connector) is included and ready to use
    click to see conversion of pressure unit 
    You must calibrate "Zero Point" under 10-4 Torr before measuring vacuum system from 10-4 - 10-3 Torr, otherwise, the gauge may not display accurately in that range.    For detailed calibration procedure, please refer to the operation manual below.
    MTI can help customer finish the "Zero Point" calibration before shipping upon customer's special request at extra   .
    Anti-corrosive version gauge can be used for aggressive gases such as Hydrogen sulfide, ammonia, etc.
  • Weight
  • 136 g (4.8 oz)