OTF-1200X-S-UL is a UL certifiable compact and energy saving (1200W power consumption) split tube furnace with a max. working temperature of 1200°C and All electric parts are UL / MET / CSA certified.
The furnace can be adopt either a 1", 2" or 2.36"(60mm) O.D quartz tube (optional) with a pair of stainless steel vacuum sealing flanges.
The 1/4" barb fitting for rubber hose connection allows heating sample in vacuum or flowing gas.
Built-in precision temperature controller can provide up to 30 segments of heating and cooling steps with +/- 1 °C accuracy.
SPECIFICATIONS
Furnace Structure
•Double layer steel structure. •High purity Al2O3 fibrous insulation with Max. energy saving •High purity alumina coating on refractory ceramics for longer service life.
Power
1.2 KW
Voltage
110VAC or 220VAC (Please select the voltage in the option table)
Max. Temperature
1200°C (< 1 hour)
Continuous Temperature
1100°C (continuous)
Max. Heating Rate
<= 20 °C/min
Heating Zone Length
8" (200mm), single zone.
The following picture shows the temp. distribution across the heating zone, please click to enlarge.
Constant Temp. Zone
2.3" (60mm) (+/-1°C) @ 1000 °C
Temperature Controller
•PID automatic control via solid state relay with 30 steps programmable •Built in Over Temperature and Thermocouple Failure Protection •Optional : The furnace may be operated by PC with installing a control module.
Please order a MTS02-B control module at extra cost.
Temperature Accuracy
+/- 1°C
Heating Elements
Fe-Cr-Al Alloy doped by Mo
Tube Size
•Please select the tube size in the option bar, ( click below to order spare tube )
•2" and 2.36" tube flange with 1/4'' Bard fittings, 1/4'' tube feedthrough port (for 1/4" O.D thermocouple insert) and a KF25 vacuum port(click bottom left picture to see details ) •1" flange has no thermocouple insert ( click bottom right picture to see details )
Vacuum Level
10-2torr (by mechanical pump)
Fitting Ports & Optional Parts
•You may need a vacuum valve at the vacuum port end ( click picture left to order ) •You may consider to order quick connecting flange at extra cost. •You may click the pictures in below to order furnace with vacuum pump and a temperature caliberation kit.
Dimensions
•With lid close : 340mm(L) × 300mm(W) × 400mm(H) •With lid open : 340mm(L) × 300mm(W) × 560mm(H)
Net Weight
35 Kg
Shipping Package Size
40''(L) x 30''(W) x 33''(H)
Shipping Weight
100 lbs
Warranty
One year limited warranty with lifttime support (Consumable parts such as processing tubes and o-rings are not covered by the warranty, please order replacements at related products below.)
Compliance
•CE Certified •All electric components ( >24V) are UL / MET / CSA certified •The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. ( please click marks below to learn details )
Application Notes
•Tube furnaces with quartz tubes are designed for using under vacuum and low pressure < 0.2 bar / 3 psi / 0.02 MPa •Attention : Due to the high pressure gas output from the gas cylinder, it is necessary to install the gas pressure regulator with it to reduce the output pressure, avoid overpressurize the furance chamber and ensure a safe operation.Click here to learn the installation of a gas regulator. •Vacuum limit definition for all quartz tube furnaces : * Vacuum pressures may only be safely used up to 1000°C •The flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube •How to set up ceramic tube and vacuum flange for MTI tube furnaces. •For safety, you may consider to put the small tube furnace inside a humehood. ( click picture left to see )