•Thermal efficient ceramic (high purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency. •Resistance wire coil on three sides of interior chamber for fast and uniform heating. •Heavy duty double layer structure with cooling fan to keep furnace exteriors safe to touch. •Vent port installed on top doubles as outlet for gas flow. •0.5" diameter observation window made of quartz glass allows the user to see inside chamber. •Gas fill tube is included which can be installed to replace the observation window -- see left 2 pictures below. •Optional Al203 sample plate can also be ordered for this furnace.
Chamber Dimensions
•12" D x 8" W x 5H" (30 x 20 x 12 cm) •480 cubic-inch or 7.2 Liter •Click picture to see details
Power
3500 Watts
Voltage
208 -240V Single Phase 50/60 Hz
Operating Temp Range
•100-1100 °C •1100 °C (Continuous) •1200 °C Max (< 1 hour)
Stability at 1000 °C
+/- 0.5 °C
Uniformity at 1000 °C
+/- 2.0 °C
Max. Heating Rate
50°C/ min.
Temperature Control
•PID automatic control with 30 programmable segments •Please click here to learn why SCR is more accurate than SSC (Solid state relay). •Built-in over temperature alarm and protection allows for operation without attendant. •+/- 1 ºC temperature accuracy. •K type thermocouple installed for immediate use. •RS485 Communications Port. •Optional:
•The furnace may be operated by PC by installing a control module. Please order a MTS-02 control module at extra cost. •If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer (laptop) from us to avoid software installation problems.
Gas fill tube
Stainless steel tube ( 5 mm dia ) with flange can be installed as gas inlet port.
Shipping Weight
160 Lbs ( shipping by pallet )
Overall Dimensions
25" x 21" x 27" (D x H x W)
Warranty
•One year limited warranty with life time support. •ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
Compliance
CE Certified
Application Notes
•For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min. •Cooling rate shall also not exceed 10 °C /min. •This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. •Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
CE Certified
