Working Voltage | 220V 50/60Hz, Single Phase (110V AC is available at extra cost) |
Glove Box Chamber & Airlock Chamber
| • Case Material: Made of 304 stainless steel sheet
- • Dimensions: 1230 mm(L) x 740mm(W) x 900mm(H)
- • Total Height with frame: 1860 mm
- • Max. Positive Pressure: 810 Torr ( flowing gas only,
not designed for vacuum ) - • Airlock Chamber with Airlift
- º Dimensions: 360mm(ID) x 435mm(L)
- º Max. Vacuum Level: 0.05 Torr
- • Two 175mm diameter glove port with a pair of
6'' Butadyl® gloves - • One slidable Sample Shelf is built on top inside
glovebox to make operation at easy - • The LED light is the built-in outside glove box
|
Gloves
| • Glove Port size: 190mm(Dia.)- • 8'' Butadyl® Gloves included (with increased
stretching, bending ability and tear strength, and offer strong resistance to aromatics, hydrocarbons, solvents, fats, and acids) - • Clamps and sealing flanges included
|
Transparent Front Panel | • Front Panel made of transparent plastic - • Dimension: 1200 mm(L) x 700mm(W)
- • Removable for putting in devices
|
Purification System | • Automatic moisture remove to < 2 ppm (Li-Ion battery assembling requires <11 ppm moisture)- • Precision Humidity Analyzer with KF25 Flange (0-999
ppm) is installed on the Purification System with accuracy +/-0.1 ppm - • Large capacity moisture filter built-in bottom of
a mobile cart, which can soak moisture up to 1.5kg - • Regeneration Temperature Controller is built-in for
automatically regenerating the filter - • The automatic pressure control system is built in
to keep the pressure at a constant level - • 6" color PLC touch panel is included which can set
and display the humidity and pressure level. (Please click the first picture below for details) - • The control panel is removable, which can be placed
anywhere for easy operation
|
Purification Pipeline | 304 stainless steel, KF40 port |
Vacuum pump
| - • Heavy-duty vacuum pump with filter is included for
faster vacuum and removing moisture - • Stainless steel vacuum bellow and valve are
included
|
Gasses Requirement | • Working gasses: Atmospheric Gases, N2, Argon - • Regeneration Gas: 95% N2 + 5%H2
- • One float meter built on the front of a mobile cart for
accurate gas filling
|
Leakage Rate in Glove Box Chamber | < 3 Torr/hour |
Power Extension | • One extension socket (Max power 1500W) is installed in the glove box main chamber- • The power cord was included (For use with
208~240V power supply, no plug will be included)
|
Warranty | • One-year limited warranty with lifetime support- • Rusting and damage due to improper storage
condition or maintenance are not covered by warranty - • Gloves are consumable items and are not covered
under warranty
|
Application Notes & Warnings | • The interconnections between the glovebox chamber and the gas purification system must be unimpeded during the purification cycles. - • The use of corrosive gasses is prohibited as they will
damage the water sensors. - • Regularly perform regeneration to maintain optimum
purification efficiency. - • The H2O removing rate is largely dependent on the
type of purging gas used. For faster chamber purging process, Nitrogen is preferred over Argon due to its lighter mass. - • Corrosive liquid (such as LiPF6 electrolyte) must be
remain sealed in a container inside the glove box. Otherwise, liquid-vapor may condense and corrode the steel chamber and purification pipeline.
|
Dimensions for Glove Box and options |
- • Glovebox: G1230mm L × 2300mm W × 1860mm
H ( click picture below to see the detail size - • Tube furnace with bottom loading or melt spinner
may connect to the glovebox is upon request
-
|
Operation Manual |
|