SYJ-150 is CE certified low-speed diamond saw, which equips with the advanced digital micrometer and a digital speed display controller, it is the perfect tool for
cutting/dicing/slicing all kinds of materials up to 32.5 mm thickness, especially for brittle crystals, ceramics, TEM samples, and even plastic samples. Also, this saw can
be used for cutting cylindrical cell for failure analysis.
SPECIFICATIONS:
Voltage and Power
• AC 110V/220V switchable for worldwide usage
• 110VDC Motor
• 8Amp fuse installed
Speed Range
Variable 0-600 rpm with LED digital display
Cutting Width & Depth
• The cutting width of the slice is controllable from 1mm ~ 24mm by adjusting the LCD digital micrometer. The LCD micrometer is waterproof with a resolution of 0.001 mm and accuracy of +/-0.003 mm.
• 32.5mm max. cutting depth (when using 35mm Dia. blade flange) Please click the pic below to know the cutting depth
Diamond Blades
• Three blades are included for cutting various materials
• SiC blade: 4" x 0.35 mm x 0.5" Arbor for cutting nonferrous metal materials, such as superalloys.
• Al2O3 blade: 4" x 0.35 mm x 0.5" Arbor for cutting ferrous metal materials, such as iron and steel.
• Full sintered diamond blade: 4" x 0.35 mm x 0.5" arbor for cutting crystal, ceramic, and plastic materials
• Two angles adjustable sample holder is included, please click the picture below for the details (max. opening 26mm)
• One Mini-vise is included, which can be easily adapted onto the sample holder to clamp rod shape specimens with a diameter up to 1'' max.
•
Package Dimensions
19"(L) x 15"(W) x 15"(H) (click to enlarge the picture)
Balancing Weights
Front (SYJ150-03): 0.75 lbs Back (SYJ150-02): 0.55 lbs
Shipping Weight & Dimension
32 lbs, 18" x 14" x 14"
Warranty
Two years limited with lifetime support (not including rusted parts due to inadequate storage conditions)
Certification
• CE Certified.
• NRTL or CSA certification is available upon request
Application Notes
• Must use anti-corrosion coolant during cutting to avoid rusting the lead screw. Please never use water as the coolant during cutting. You may select ourLubeCool-150lubricant as a coolant which will make the diamond blade cut more efficiently and prevents corrosion. Also, you can use W10- 30 motor oil as a coolant, which is available at any auto store.
• Please clean the machine after the completion of each use, especially the lead screw using WD-40 lubricant (1 can include) after each use. Make sure the X, Y, and Z axes can move freely without blocking and rusting.
• Using spacers to make gang saw, you may section multi-sample in one time ( click pic left to learn how )
Warning
• It is required to use proper cutting fluid with the saw to prevent corrosion of the machine components. We strongly recommend you use oil-based coolant orlube cool lubricant with the water. Please Do not use tap water directly, the rust component is not part of the warranty.
• Never cut any materials without the use of proper cutting fluid. If you do so, serious damages can be caused by the spooler driving mechanism.
• For cutting the sticky materials such as non-ferrous alloy, epoxy, and plastic, you must sharpen the diamond blade frequently. We suggest that cutting sample along with the included dressing stone(Glue sample and the dressing stone side by side and cut them together, this process will help keep the blade sharp enough for efficient cutting.
• The saw can be used inside a glovebox with N2 gas, but no Ar gas, please.