SYJ-30 (originally EQ-MT-200) is CE certified heavy duty bench top wet abrasive cut-off saw.
It is designed to cut metallographic samples faster and safer at an affordable price.
The 10" SiC or diamond cutting blade is used for cutting all kinds of materials with a maximum sample size of 30 mm x 30 mm.
A cooling system is built in to avoid overheating sample or splashing water during cutting.
SPECIFICATION
Input Power
208 - 240 V AC single phase ( 50、60 Hz )
( 110V version is available with a 1500W transformer )
Motor Power
AC Motor with 1.1 KW
Motor Speed
2800 RPM
Cutting Blade
Two 10" OD x 1.25" (I.D) x 2 mm (Thick) SiC cutting blade included.
Click picture below to order spare blades
Max. Cutting Section
30 mm x 30 mm
Mount Vise
T clamp vise is included for quick tightening or release
Driving the Cut
Manually push up. It is safer and faster than to push down along the cut-off saw.
Cooling system
•May use Tap water as coolant, inlet flow is adjustable at the front panel, and outlet flow is adjustable at the bottom of machine.
Must clean machine after cutting to avoid corrosion. •May use Heavy Duty Coolant Circulating Tank with Pump, 4 L with anti-corrosion LubeCool-150 lubricant as coolant to recirculate coolant
( Please click underlined or picture below to order at extra cost )
Machine Dimensions
650 x 450 x 400 mm
Net Weight
60 Kg ( 132 Lb )
Shipping dimensions
45" x 35" x 30"
Shipping weight
160 lbs
Warranty
One Years limited warranty and life time support, not including blade and rusted parts due to inadequate storage conditions.
Certification
CE certified
Instruction & Video
Application Notes
•How to change cutting blade •How to mount sample •Water inlet & drain pipe •Please use anti-corrosion coolant during cutting to avoid rusting the lead screw. Not suggesst to use water as coolant during cutting. You may select our LubeCool-150 lubricant as coolant, and build up a small circulation system with Heavy Duty Coolant Circulating Tank with Pump, , which will make diamond blade cut more efficient and keep the machine from corrosion. •Also, you can use W10-30 motor oil as coolant, which is available at any Auto store. •Always clean machine, especially the lead screw using W40 lubricant after each use.