EQ-SP-15AB Dual Station 15 KW Induction Heater is designed for material research lab to quickly melt and perform heat treating to metallic materials upto 1 kg. The 2m long power cable allows heating station and the control station being located upto 2m from each other for operation safety.
SPECIFICATIONS
Working Voltage
•208 - 240V AC, •50/60 Hz, •Sinlge Phase
Max. Input Current
•34 Amp (Min. 40A breaker required) •Power cable included (Plug is not included)
Output Frequency
30 - 80 kHz
Heating Current
200 - 600 Amp
Maximum Oscillating power
15 KW
Duty Cycle
80 %
Max. Distance Between Heater and Controller
2 m
Max. Sample Weight
1 kg
Control Station
•Automatic timer control or Manual control selectable
•Manual Control : by Foot Pedal •Automatic Heating Time : 1 - 99 Seconds •Automatic Dwell Time : 1 - 99 Seconds •Automatic Colling Time : 1 - 99 Seconds
Air Cooling
Rear Fan
Water Cooling
•Flowrate : 2 ~ 5 L/Min •Pressure : 0.2 MPa (29 Psi) •Protection : Over pressure and over temperature switch •Tap water is acceptable, but using Recirculating Water Chiller is highly recommended. Please click picture left below to order separately at extra cost
Induction Coil
•Three coils with the following dimensions are included :
•Coil #1 : 83 mm (OD) x 65 mm (ID) x 72 mm (H) •Coil #2 : 82 mm (OD) x 65 mm (ID) x 70 mm (H) •Coil #3 : 78 mm (OD) x 66 mm (ID) x 40 mm (H)
Display
Digital display shows output power and current
Product Dimensions
•Control Station : 18" x 8" x 17" •Heating Station : 12" x 8" x 13"
Warranty
One Year limited warranty with lifetime support
Operation Manual
Application Notes
•Applications :
Melting
Sintering
Annealing
Heat treatment
Quenching
•Heater will shut down if over output occurs. Please reduce coil cycle number or sample size to keep heater operating under Max power •Please click here to learn the Fundamentals of Induction Heating •Please click here to learn how to setup crucible for metling •Melting time and temperature are related to materials, crucible, refractory insulation, etc. If you do not know whether the induction heater can melt your sample or not, please contact our engineer for consulting. Have your alloy's composition, melting point, and quantity to be melted prepared •You may melt metal sample in vacuum using 60 mm dia half open quartz tube with vacuum flange/valve. Please click the picture below for details on how to setup the vacuum tube •You may need a graphite crucible with diameter < 54 mm to put inside quartz tube with some refractory material and covering lid to support the crucible
Net Weight
25 kg (55 lbs)
Shipping Dimensions
40" (L) x 30" (W) x 30" (H)
Shipping weight (Pounds)
45 kg (100 lbs)
STANDARD PACKAGE
Item
Description
Qty
Pictures
1
Heating Station
1
2
Control Station
1
3
6 mm (Dia.) x 40 mm (H) Induction Coil
1
4
8.5 mm (Dia.) x 70 mm (H) Induction Coil
1
5
9 mm (Dia.) x 72 mm (H) Induction Coil
1
6
Cable for connecting Heating Station and Control Station
1
7
Foot Pedal with Cable
1
8
Water Cooling Fitting and clamp (Pipe is not included)
