EQ-SP-25A Compact 25 KW Induction Heater is designed for material research lab to quickly melt and perform heat treating to metallic materials up to 2 kg.
SPECIFICATIONS
Working Voltage
•208 - 240V AC, •50/60 Hz, •Three Phases (380V or 440V, Three Phases are available upon request)
Max. Input Current
•42 Amp (Min. 50A breaker required) •Power cable included (Plug is not included)
Output Frequency
30 - 80 kHz
Heating Current
200 - 1000 Amp
Maximum Oscillating power
25 KW
Duty Cycle
80 %
Max. Sample Weight
2 kg
Timer Control
•Automatic timer control or Manual control selectable
•Manual Control : by Foot Pedal •Automatic Heating Time : 1 - 99 Seconds •Automatic Dwell Time : 1 - 99 Seconds •Automatic Colling Time : 1 - 99 Seconds
Air Cooling
Rear Fan
Water Cooling
•Flowrate : >10 L/Min •Pressure : ≥0.2 MPa (29 Psi) •Tap water is acceptable, but using Recirculating Water Chiller is highly recommended. Please click here to order separately •Protection : Over pressure and over temperature switch
Induction Coil
•Three coils with the following dimensions are included :
•Coil #1 : 77 mm (OD) x 65 mm (ID) x 46 mm (H) •Coil #2 : 82 mm (OD) x 65 mm (ID) x 65 mm (H) •Coil #3 : 82 mm (OD) x 65 mm (ID) x 80 mm (H)
Display
Digital display shows output power and current
Product Dimensions
18" (L) x 8" (W) x 17" (H)
Warranty
One Year limited warranty with lifetime support
Operation Manual
Application Notes
•Applications :
Melting
Sintering
Annealing
Heat treatment
Quenching
•Heater will shut down if over output occurs. Please reduce coil cycle number or sample size to keep heater operating under Max power •Please click here to learn the Fundamentals of Induction Heating •Please click here to learn how to setup crucible for metling •Melting time and temperature are related to materials, crucible, refractory insulation, etc. If you do not know whether the induction heater can melt your sample or not, please contact our engineer for consulting. Have your alloy's composition, melting point, and quantity to be melted prepared •You may melt metal sample in vacuum using 60 mm dia half open quartz tube with vacuum flange/valve. Please click the picture below for details on how to setup the vacuum tube •You may need a graphite crucible with diameter < 54 mm to put inside quartz tube with some refractory material and covering lid to support the crucible. Please click on picture below for more details :
Net Weight
28 kg (62 lbs)
Shipping Dimensions
40" (L) x 30" (W) x 30" (H)
Shipping weight (Pounds)
45 kg (100 lbs)
STANDARD PACKAGE
Item
Description
Qty
1
Induction Heater
1
2
6 mm (Dia.) x 45 mm (H) Induction Coil
1
3
6 mm (Dia.) x 55 mm (H) Induction Coil
1
4
6 mm (Dia.) x 80 mm (H) Induction Coil
1
5
Foot Pedal with Cable
1
6
Water Cooling Fitting and clamp (Pipe is not included)