EQ-SPG-6A-I Compact 6 KW Ultra High Frequency Induction Heater is designed for quickly melting small quantity (< 100 g) of metallic material.
SPECIFICATIONS
Working Voltage
•180 - 245 V AC, •50 - 60 Hz, •Single Phase
Max. Output Power
6 KW
Input Current
5 - 30 Amp (50A breaker required) Adjustable with digital display
Output Frequency
100 - 500 kHz
Duty Cycle
100 %
Max. Sample Weight
100 g
Timer Control
•Automatic timer control or Manual control selectable
•Manual Control : by Foot Pedal •Automatic Heating Time : 1 - 99 Seconds •Automatic Dwell Time : 1 - 99 Seconds •Automatic Colling Time : 1 - 99 Seconds
Air Cooling
Rear Fan
Water Cooling
•Flowrate : > 3 L/Min •Pressure : ≥0.2 MPa (29 Psi) •Tap water is acceptable, but using Recirculating Water Chiller is highly recommended. Please click here to order separately •Protection : Over pressure and over temperature switch
Water protection
Over pressure and over temperature switch
Induction Coil
•Made by 5 mm Dia. Copper tube (One Coil with 20 mm (Dia.) x 45 mm (H) included) •Customized copper coil is available at extra cost (/ea) upon request
Product Dimensions
520 mm (L) x 240 mm (W) x 500 mm (H)
Warranty
One Year limited warranty with lifetime support
Operation Manual
Application Notes
•Applications :
Melting
Sintering
Annealing
Heat treatment
Quenching
•Heater will shut down if over output occurs. Please reduce sample size to keep heater operating under Max power •Please click here to learn the Fundamentals of Induction Heating •Please click here to learn how to setup crucible for metling •Melting time and temperature are related to materials, crucible, refractory insulation, etc. If you do not know whether the induction heater can melt your sample or not, please contact our engineer for consulting. Have your alloy's composition, melting point, and quantity to be melted prepared