General Specifications
|
| Potentiostat | Yes |
| Galvanostat | Yes |
| ZRA | Yes |
| FRA | Yes |
| Cell Connections | 2, 3, 4 of 5 electrode terminals |
| Temporal Resolution | 10 μs |
| Floating vs. Earth ground | Selectable and changeable with switch |
| Input Impedance | > 10 TOhm (typical) |
| Input Bias Current | < 5 pA (typical) |
| Onboard Memory | 256 MB for automatic data backup |
| EIS Measurement |
| AC Frequency Range | 1 μHz ~1 MHz |
| AC Singal Amplitude Voltage | up to 1 V with 0.24 mV resolution |
| AC Singal Amplitude Current | up to 10% if range with 0.002% resolution |
| Potentiostatic Input/Output |
| Compliance Voltage | ± 20V |
| Controlled Voltage (Scan Range) | 1 range, ± 10 V |
| Applied Potential Accuracy | 0.1% of setpoint, down to 2 mV |
| Applied Potential Resolution | 0.3 mV |
| Measured Potential Accuracy | 0.1%, down to 1 mV |
| Measured Potential Resolution | 300 μV |
| Galvanostatic Input/Output |
| Maximum Current | ± 1 A |
| Current Ranges | 8 ranges (100 nA to 1 A) |
| Applied Current Accuracy | 0.2% of range, down to 1 nA |
| Applied Current Resolution | 0.003% of range, down to 3 pA |
| Measured Current Accuracy | 0.1% of range, down to 100 pA |
| Measured Current Resolution | 0.003% of range, down to 3 pA |
| Computer & Software | Brand new laptop with MS Window 8 and latest version of testing software are installed and calibrated for immediate use.
|
| Input Power | 110 ~ 240 VAC, 50/60Hz
|
| Dimensions | 24 cm × 17 cm × 6 cm |
| Weight | 0.9 kg (not including external power supply) |
| Operation Instructions |  |
| Compliance | CE Certified |
| Warranty | One Year limited warranty with lifetime support for the battery analyzer. (Note: MTI does not carry warranty for the Laptops. In case service is needed for the laptops, please contact laptop manufacturer directly for warranty/nonwarranty service.) |
| Application Notes | New buyers must buy the software-installed laptop to avoid trouble from installation. |
