Furnace Structure
| • Double layer steel structure with dual air cooling fans.
- • One pair of sliding rails are installed on bottom of furnace, which allows furnace to be manually moved
from side to side.
- • Three heating zones with total 24" length ( 8"L for each zone )
- • Vacuum flanges and a digital vacuum gauge are installed for immediate use.
- • Slding rail length is about 1200mm, the furnace can slide 600 mm distance.
- • One slide stopping clamp is included for holding the position of the furnace.
|
Power | 7.0KW |
Voltage | AC 208-240V Single Phase, 50/60 Hz |
Max. Temperature | 1200°C (<1 hour) |
Continuous Temperature | 1100°C |
Heating Zone Length
| • Three zones: 610mm (24") in total- • Z1 - Z2 - Z3:152.4mm (6") + 304.8mm (12") + 152.4mm (6")
|
Constant Temperature Zone | 300 mm (+/-1°C @ 400-1200°C) |
Heating Elements | Fe-Cr-Al Alloy doped by Mo |
Processing Tube Size
| High purity fused quartz tube
Size: OD: 80 x ID 75 x Length 2000 ( mm) Two foam ceramic blocks are included which must be placed inside tube to avoid heat radiation damaging O-ring
|
Temperature Controller
| • Three temperature controller with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
- • Built-in over temperature alarm and protection allows for operation without attendant.
- • Three K type thermal couples are included.
- • Optional:
- º The furnace may be operated by PC by installing control module. Please order a MTS-02 control
module at extra cost.
- º If you order the PC control module together with the furnace, we will install and test it before
shipping. We recommend you to order a computer (laptop) from us to avoid software installation problems. For more information please click here.
|
Temperature Accuracy | +/ - 1°C |
Vacuum Flanges
| • Stainless steel vacuum flanges are installed on both ends of tube with heavy duty support.
- º Left flange: hinged type flange for easy operation with KF-25 pump connector, digital vacuum
gauge and needle valve.
- º Right flange: one needle valve and 1/4" thermocouple feed-through. An 18" length x 1/4" dia.
K type thermocouple (included) connected to an Omega temperature calibrator (included) will be inserted through this flange to monitor the heating and cooling rates of the sample's position during furnace sliding.
- • Click pictures below to see details:
| | | | | Right Flange
| Left Flange
| Temp. Calibrator
| 24" K type T/C | Digital Vacuum Gauge |
|
Vacuum Level
| • Limited by pump ( pump is not included, click on pictures to order )- º 10E-5 torr can be reached by molecular pump
- º 10E-2 torr by mechanical pump.
|
Sliding Rails / Table
| |
Dimensions | |
Net Weight | ~ 250 Kg
|
Shipping Dimension | 90" x 40" x 45" (inch)
|
Shipping Weight | 600 lbs |
Warranty | One year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products below). |
Laptop, software & WiFi Control(Optional)
| |
Compliance
| • CE Certified- • All electric components ( >24V) are UL / MET / CSA certified
- • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.
please click marks below to learn details )
|
Application Notes
Click here to learn the installation of a gas regulator
| |
Warning | • Fast sample cooling can be achieved by sliding the heating chamber away. Please wear protective gears such as heat resistant suit & gloves if you intend to do so.
DO NOT TOUCH THE TUBE SURFACE WHEN IT IS HOT!
|
Operation Instructions |
|