Chamber Features |
• The chamber is structured with stainless steel and welded to bracing pieces.- • The Inner Chamber size: 415 mm x 345 mm x 373 mm
(16.3 x 13.6 x 14.7", 53 Liter, 1.88 cubic-foot) (L×H×D) - • A good vacuum sealing is achieved by the silicone gasket and the positive latch door.
- • The double layers observation window consists of 1/2" tempered glass and transparent
polycarbonate shield. - • Two stainless steel racks are included to facilitate process efficiency.
- • An adjustable leak valve for venting is shown below.
 
|
Vacuum Level
|
• Ultimate pressure with the 240 L/m mechanical pump only: < 50 mTorr (at 200 °C), 8 mTorr at R.T.
after bake-out. - • Ultimate pressure with 33 L/s turbopump: 5E-5 Torr (at R.T.), 1 mTorr at 200 °C.
- • The vacuum pump is not included. Please order separately.
- • Double Stage Rotary Vane Vacuum Pump Recommended. Please click the pictures below to order
the pump.
|
Working Voltage |
Please select from option:
- • AC 110 - 120 V 50/60 Hz (ETL Certificated)
- • AC 220V (CE Certificated)
|
| Input Power | |
Working Temperature | |
Temperature Controller
 |
• Single-point temperature setting- • Built-in over-temperature protection
- • PID precise temperature control
- • Temperature control accuracy: +/-1°C
- • Temperature uniformity: +/-5°C @ 100°C, 25" Hg at center 8" x 6.5" area only
- • Optional: Controller can be upgraded 30 segment programmable at extra cost.
|
Fittings
| KF-25 Port |
Standard Package | |
Optional accessories | |
Operation Instruction
|
 
|
| Dimensions | - • Oven: 710 x 545 x 542 mm (L x W x H)
|
| Shipping Weight & Dimensions | - • 250 lbs 48" x 40" x 32"
|
Warranty |
• One Year Limited Manufacturer Warranty with Life-Time Support (Note: the silicone door gasket is not
covered by warranty)
|
Compliance | |
Application Notes |
• For accurate temperature measurement, you may do calibration by using the temperature calibrating
kit.
- • For more information on how to calibrate the oven temperature, please review How to calibrate the
oven. - • An optional 4-pin electric feedthrough could be installed in the oven at an extra cost, which provides
a direct electric connection without breaking the vacuum. Please contact info@mtixtl.com for inquiries.
-
 
|
Attention |
• It's normal that the SS chamber wall will be slightly deformed and lose its shiny surface during high-
temperature operation under vacuum. However, this would not affect any performance.- • Please do not place the sample on the chamber bottom directly.
- • This product is not made by MTI but distributed for Shanghai Yiheng Manufacturer.
-
 
|
