Lithium Foil & Chip

Lithium Foil ( 0.75 mm thick x 50mm W ) for Li-ion Battery R&D, 200g/bag - EQ-Lib-LiF7550

Lithium Foil ( 0.75 mm thick x 50mm W ) for Li-ion Battery R&D, 200g/bag - EQ-Lib-LiF7550

기본 정보
Product Name Lithium Foil ( 0.75 mm thick x 50mm W ) for Li-ion Battery R&D, 200g/bag - EQ-Lib-LiF7550
Sale Price Call for Price
Product Code EQ-Lib-LiF0550
Quantity 수량증가수량감소
상품 옵션
 
Lithium metal is widely used for Li-ion rechargeable battery R&D, Please click the link below to see a paper
published in Nature Communication" which use MTI metal foil:     
High rate and stable cycling of lithium metal anode
by
Jiangfeng Qian, Wesley A. Henderson, Wu Xu, Priyanka Bhattacharya, Mark Engelhard,,
Oleg Borodin & Ji-Guang Zhang


SPECIFICATIONS:


Purity     •  99.9% Lithium
Melting Point     •  180.5 °C
Density     •  0.534 g/cm3
Color     •  Silver
Dimension     •  0.75 mm thick x 50 mm  wide
Chemical Ingredients
    lithium    99.97%
    nitrogen    0.0080%
    calcium    0.0075%
    iron    0.0047%
    silicon    0.0040%
    copper    0.0025%
    aluminum    0.0010%
    sodium    0.0010%
    nickel    0.0008%
Net Weight     •  200g/roll
Sealing     •  sealed in Al container with filled Ar
Use     •  Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel
         until a shiny silvery surface appears (inside an argon glovebox).

Safety Data Sheet

        


Operation

     •  Package must be opened and stored inside a glove box with Argon
        Gas and moisture less than 8 ppm and O2 less than 2 PPM.     
        Never use N2 gases in glovebox!!!


     •  No return or refund for misusing or wrong storage which causes
         The lithium foil oxidation


  Notes

  •      •  MTI only sells Li foil within the USA and does not accept international
            order due to restrictions on hazard material exportation!!!
  •      •  MTI reserves the right to charge additional handling fee due to special
           shipping/handling requirements.
  •      •  Operation and Storage: Lithium is very active in the air, please carefully
            read the SDS carefully.
  •      •  Lithium foil maybe oxidized during handling and storage.  if you find any
            oxidation on the surface of Li-chip,  please use nylon brush/stainless
            steel scalpel to remove it before using.
  •      •  If the Li metal is stored in mineral oil, please refer to this guide on
            How to clean mineral oil off Lithium metal using anhydrous Toluene
  •      •  If you would like to thinner foil,  please consider using rolling machine
            by DIY



Lithium Storage Options