Working Voltage | 110V/220V AC, 50/60Hz Single Phase |
Max. Power Consumption | 140W |
Air Pressure | >0.5 MPa is required (Air Compressor is not included, please click here to order)
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator. pic1 pic2
|
Compatibility | CR123 / 18650 / 26650 / 32650 / AA (Please select the cell type in the option bar) |
Grooving Dimensions | - Depth: 1.2 - 2.0 mm
- Width: 1.1 - 1.5 mm
|
Grooving Accuracy | +/- 0.1 mm |
Grooving Blade Durability | >1 million times |
Productivity | 400 grooving per hour |
Product Dimensions | 600mm(L) x 230mm(W) x 350mm(H) (24" x 9" x 14") |
Net Weight
| 68 kg (150 lbs)
|
Compliance | CE Certified |
Patten Number : ZL-2011-2-0464651.8 |
Warranty | - One year limited with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
Operation Video | |
Application Notes | - Customized die for other cylindrical cell types is available upon request
- It is necessary to seal the cap of the cylindrical case by using the MSK-510 sealing machine after grooving the opening end
- Each machine should be used with one particular type of grooving die only. A separate set of machine is suggested to use for another set of grooving die.
- Each type of cylinder cell can only be grooved specifically by a certain model of this equipment. Please select the type of cylinder cell in the Product Options dropbox to check the model number and price for the corresponding grooving die of each cylinder cell type
- Please check the chart below to order the cylindrical cases.
|