Coin cell Crimping Machine

Gas Driven Decrimper for Disassembling CR20XX Series Coin Cells, (Ar Gas Compatible ) - MSK-PN110-DS (부가세 별도)

Gas Driven Decrimper for Disassembling CR20XX Series Coin Cells, (Ar Gas Compatible ) - MSK-PN110-DS (부가세 별도)

기본 정보
Product Name Gas Driven Decrimper for Disassembling CR20XX Series Coin Cells, (Ar Gas Compatible ) - MSK-PN110-DS (부가세 별도)
Sale Price 5,300,000원
Product Code MSK-PN110-DS
Quantity 수량증가수량감소
상품 옵션
 
Specification

Compressed Gas and Force
 
  • Manual Adjustable Sealing Force: <1.0 MPa ( 0.9MPa is recommended.)
  • Operation Pressure of Gas: 0.7 ~ <1.0MPa (Strict maximum)
  • No any Electric part for safe operation
Output dimension
  • O.D + 0.15mm after crimping (Original O.D 19.96mm, then output is about 20.11mm)
Die Set MaterialHardened Steel
Die Set & Compatibility
 
  • Disassembling dies for CR2016, CR2025 & CR2032 coin cells included
  • Optional: Disassembling dies for CR23XX, 24XX are available upon request, please contact us for details
  • Spare crimping dies ( CR20XX, CR1220, CR23XX, CR24XX) can be ordered separately by clicking the 2nd picture on the left.
Measurement Accuracy± 0.5%FS
Glove Box Compatibility   
  • A KF40 quick clamp connecting accessory set is included for glove box application.
  • Please use Inert gas when operating in the glovebox
Stroke Length20mm
Gas Consumption490ml/stroke
Clean Room Compatibility1000 grade cleanroom compatible
Gas Inlet/Outlet



  • 6mm O.D tube fitting
  • Inert gas if use inside glovebox ( automatic pressure controlled glovebox )
  • compressive air if use outside glovebox.
Note:Air Compressor or Inert Gas Tank (0.7~1Mpa) are needed for the machine operation, please purchase separately 
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator
StructureHeavy Duty Steel
Product Dimensions
 Click picture for detail.
Compliance
  • No Electric part inside the machine, so NRTL certification is not required
WarrantyOne Year limited warranty with lifetime support (Rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty)
Operation Instructions
     
Application Notes
  • Maintenance: Electrolytes are highly corrosive materials. Crimping dies must be cleaned with ethanol after each use to avoid corrosion and deformation.
  • Please browse our crimper for crimping coin cell.
  • Do not use air compressor when operating the unit in the glove box. Otherwise, air can flow inside and cause contamination. Use high purity inert (Ar or N2) gas instead.
  • To avoid damaging the machine, the gas pressure must be lower than 1.0MPa (10 bars or 145 PSI).
  • Please use MTI Branded Coin Cell Cases with our crimper. We don't guarantee the crimping quality if other brand cells are used.
Net Weight40 kg
Shipping Weight & Dimensions100 lbs; 40"x30"x25"