| Features | - Individual temperature control for upper and lower rollers, up to 110Calender maximum.
- Rolling direction selectable (back and forth), easy-to-return material
- Adjustable gap between rollers (0~2mm) with micrometer thickness indication
- Rollers are made of high-quality tool steel with Cr plated
|
| Power | |
Rollers Size & Surface Hardness | - Diameter: 200 mm (8")
- Width: 250 mm ( 10")
- Max Rolling Speed: 5.92RPM
- Max Linear Speed: 60mm/sec
- Speed Display: 0 - 40 mm/sec (Actual Speed = Displayed Speed x 1.5)
- HRC 60-62 (Cr plated)
- Never roll materials with hardness > 50HRC
|
Max. Heating Temperature | - 110°C (< 1hr ).
- 1)Temperature > 120°C rollers may deform and cause pressing to be non-uniform;
- 2)<100C for continuous operation
|
Temperature Controllers
| - Two independent temperature controllers enable Dual-zone temperature control for the upper and lower rollers.
- 120°C maximum for less than one hour (<110°C continuously)
- Recommended Heating Rate: ~3°C/minute
- Precision temperature controller with +/- 3°C Accuracy
|
Motor | - High torque 90 VDC motor with reducing gear (1:150)
- Current: 4.4 A Max.
- Rated power 300 W
- Adjustable rolling speed: 0 ~ 40 mm/sec
- Digital control with constant output power
|
Dial Gauge Accuracy | 0.01 mm |
Rolling Thickness | 0~2 mm adjustable |
Minimum Thickness | - Depended on the original electrode's material and thickness. Typically
- 0.16 mm electrode coated on copper, min. the thickness of 0.1 mm
- 0.06 mm electrode coated on copper, min. the thickness of 0.04 mm
|
Dimensions
|  500 x 530 x 570mm (L x W x H) |
Weight | 197 kg |
Shipping Dimensions | 48"x40"x35" |
Shipping weight | 540 lb |
Operation Video
|    ←(How to replace the heating elements)
|
| Compliance | - CE Certified
- UL, TUV or CSA certification is available upon request at extra cost
|
Warranty | - One-year limited manufacturer warranty with lifetime support
- Rusting and damage due to improper storage conditions or maintenance are not covered by warranty.
|
| Optional | The vertical rolling version is available at the extra cost as Pic 1
For Roll to Roll, please consider the R2R rolling and laminating device below. (click picture 2 to order)
 Pic. 1  Pic. 2
|
| Application Notes | - Never roll materials with hardness > 50HRC
- In order to prolong the lifespan of the roller bearings, regular lubrication is recommended.
- Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared to the sheet's original thickness.
- Clean the roller for each use, and lubricate the surface of the roller if not in use to avoid corrosion
|
