Electrode Coating Preparation

Slot-Die Roll to Roll Coating System ( Max. 250mm Wide) with Precision Slurry Feeding Pump - MSK-AFA-SD300

Slot-Die Roll to Roll Coating System ( Max. 250mm Wide) with Precision Slurry Feeding Pump - MSK-AFA-SD300

기본 정보
Product Name Slot-Die Roll to Roll Coating System ( Max. 250mm Wide) with Precision Slurry Feeding Pump - MSK-AFA-SD300
Sale Price Call for Price
Product Code MSKAFASD300
Quantity 수량증가수량감소
Stock 자세히
상품 옵션
Personalization

 

MSK-AFA-SD300-UL is a CE Certified  and UL inspection ready automatic slot-die coating system with a compact footprint that is less than 6'x3'. It is perfect for making uniform coatings from 1~300 micron thick.

For Roll to Roll Coater Service, please fill out and submit the Roll to Roll Coating Service Request Form.


SPECIFICATIONS:


Working Voltage

208 - 240 VAC, 50/60 Hz, Single Phase

Max. Power Consumption

5 KW ( 50A Air breaker required )

Slot Die Coating

The slot die is perfect for uniform film coating of 1 micron and up to 300-micron thickness. By changing the shim size with various patterns, you would be able to produce continuous, intermittent, or even grid coatings that match the shim patterns. Please refer to the pictures in below for more details:

       

Slurry Feeding Pump

  • MSK-156 slurry feeding screw pump with 4 liters tank is included
  • 24DC Input, 500W
  • 0.5~0.8MPa compress gas is required.
  • Slurry feed rate: 0.1 - 150 rpm (or 0.023 - 34.5 mL/min)
  • Stirring speed: 27 rpm
   

Shim (Spacer)

0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm & 0.8mm thick shims are included for producing films with various thickness.

Tip: The thickness of the shim determines the slot opening of the die and thus has major impact on the final coating thickness. The rule of thumb is that thinner shim will produce thiner film, vice versa. 

Max. Coating Width

250 mm

Max. Coating Length

Depends on the coating and substrate thickness. Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run.

   

Coating Speed

0-800 mm / minute

Minimum Thickness & Precision

1 µm ±1%  ( dried film )
Attention: The final coating thickness is dependent on a wide range of parameters such as slurry viscosity, solid particle size, solid content, shim thickness, foil rolling speed and slurry feeding rate. Therefore, we are not able to guarantee that 1-micron level film is achivable for all kinds of slurries. For further discussion, please let us know your slurry specs and coating thickness requirement.

Max. Drying Temperature

150°C

Heating

Forced convection hot air  (IR + UV heating is available upon request)

Temperature Accuracy

±1°C

Heating Zone Length

710mm (28")

Reeling/Unreeling Shaft

75mm (ID)

Max. Reeling/Unreeling Diameter

250mm (OD)

Compressed Air

0.5-0.8 MPa (Air compressor not included. Please click here to order)
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
  pic1                pic2

Optional: NMP and Slurry Filtration System

  • You may order  Dual-Filtration System for NMP Vapor (Pic.1) and connect it to the coating system for keeping environmental healthy.
  • You may order the Magnetic De-ironing Filtration system (Pic.2) for optimizing the battery electrode slurry condition before the coating process.
 Pic.1       Pic.2                                   

Product Dimensions

Coater: L 1750 mm*W 950 mm*H 1060 mm
Slurry Feeding Pump: W 660*D 200*H 660 mm

Compliance

  • CE Certified All electric components ( >24V) are UL / MET / CSA certified
  • NRTL or CSA certification is available at extra cost. (Please click mark below to learn details)  
  •            
  • IP:  ZL 201510564515.9

Warranty

  • One Year limited warranty with lifetime support
  • Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Operation Manual & Video           
Application Notes
  • Customers are welcome to visit our facility to receive technical training before shipping of equipment (Please schedule an appointment with us in advance)
  • On-site Training is available for customers within the US only (Expenses will be covered by customers)
  • Test the flexibility of the coated electrode with EQ-MBT-12-LD mandrel bending tester. ( Click pic.1 below for detail.)
  • PET Film with single side Si Coating is available for Roll-to-Roll tape /slot die/ Micro Gravour casting of Li- ion battery electrode slurry, ceramic, functional resin, ink, and others. Please click the Pic.2 in below to view the product.
               
                          Pic.1                           Pic.2
Net Weight1000 kg (2200 lbs)
Shipping Dimension70" x 45" x 55"