| Specifications |
| Design Features |
• 30 mm diameter quartz window installed on two sides of pouch
cell for transparency measurement
• Pouch cell is sealed by PTFE O-ring without liquid and gas leaking
• One pressure gauge installed on top to monitor pressure.
You may remove the gauge and use 1/4 female port to inject
electrolyte into the pouch cell
• Pouch cell is easy assembling by only four cap mounting screws
• It is easy to separate after test for microstructure analysis
• Space saving, compact design allows you put it into the glove box
|
Material
(Please select at options bar) |
• Nylon or PEEK (Poly Ether Ether Ketone) selectable from the
product options bar
• Body: Electrolyte corrosive-proof Nylon which can sustain with
temperature up to 80ºC and O-ring: Sealed by electrolyte corrosive-
proof PTFE O-rings
• Body: PEEK (Poly Ether Ether Ketone), which is a semicrystalline
thermoplastic with excellent mechanical and chemical resistance
properties that are retained to high temperatures and O-ring:
Sealed by electrolyte corrosive-proof FKM O-rings
|
| Cell Dimension |  
|
| Electrode Sheet dimension | • Standard size:
- º Cathode Die:
57mm (L) x 44mm (W). with 10mm (L) x 10mm (W) protrude
current collector - º Anode Die: 58mm (L) x 45mm (W). with 10mm (L)
protrude current collector
• Customized size pouch cell is available upon request |
Application Note |
• In order to make metal air pouch cell, you can drill holes in the case.
We can help you do that at an extra cost
• You may use MTI die cutter to prepare electrode via layer by
layer or make winding type pouch cell electrode
(click picture below to see the machine)
• You may need an ultrasonic welder to welding electrode tape
to connect to the split cell
 Die cutter  Ultrasonic Welder
 Winding Machine
 Pre-coated Electrodes
 Other split cells
|
