Features | - 1200 max. RPM allows efficient pulverization and homogenization
- The range of jar materials (Nylon, Alumina, SS, and Agate) offered for various applications
- Easy jar installation
- Optional for variable speed and forced chilling air cooler
|
Standard Milling Jars & Media (Two Milling Jars are included) | |
Power Input
| - Single-phase 208- 240VAC 50/60Hz
- 300W Max.
- A 750W transformer can be used for 110V.
- The transformer is not included, please order at extra cost.
|
Oscillation Frequency | - 1,200 RPM (Please see the video below for a performance of the jar rotation)
- Estimated acceleration gravity: ~ 70 G.
- Note: 1500 RPM version is available upon request at extra cost, which provides > 100G force.
|
Timing Range | - 0 to 30 minutes for built-in mechanical timer
- Warning: Running time for the mill should be less than 30 minutes, otherwise the mill may overheat.
|
Feeding | - Volume: 1/3 of the capacity of the ball milling tank
- Feeding Granularity: <1mm
|
Discharging Granularity
| D50 0.1 micron minimum for oxide ceramic materials ( see pic. left ) Note: To achieve finer or desired particles via ball mill is a research project, which is depended on the material to be milled, grinding time and speed, combination of grinding jar and milling ball, etc. It is the user's responsibility to find the best milling procedure based on the material. Buyers are welcomed to the MTI laboratory in California to test before purchase. |
Noise Level | 87dBA (standing at 1ft with the machine lid open and SS milling balls in the jar) |
Compliance | - CE Certified
- For NRTL or CSA certification, please choose MSK-SFM-3-II
|
Warranty | - Two years limited warranty for parts with lifetime technical support (after June 1, 2017)
- Alumina jars are not covered by the warranty.
|
Operation Video
|
|
Speed Control Version (optional) | - Variable speed version (0 - 1800 RPM)by 24VDC motor and speed controller is available. Click the picture below for details.
|
Optional Air Cooling
Forced cold air
| - If the user needs to force conditional air cooling for some ductile materials, please click to order a Portable Spot Air Cooling Conditioner, which will keep the milling jar temperature low. ( click picture left ). It is a cost-effective way to achieve the required particle sizes and production rates for heat-sensitive or tough-to-mill materials.
Air Cooling Conditioner Test with Nylon Jar Zirconia Balls
| Milling 30 mins | Milling 60mins | The temperature of the jar without Air Cooling | 45°C
| 65°C | The temperature of the jar with Air Cooling | 35°C
| 45°C |
- Optional jars and grinding balls are available in the product options bar.
-
SS vacuum jar 50ml alumina jar Alumina balls 80ml acrylic jar Zirconia Jar
|
Application Notes | - Attention: In order to achieve the best grinding effects, it is suggested to use milling balls with a diameter of less than 10mm for a 50ml alumina jar
- Tips for choosing proper jars and milling media for milling and grinding application:
- SS mixing jar is suitable for grinding various metal materials
- For milling the oxide material, please choose Nylon or alumina/zirconia jar and media
- Please consider our SYU-3 Ultrasonic Filtration System for filtering the product.
- DO NOT USE stainless steel balls in Alumina jars or vice versa to avoid contamination.
- Please use N2 gas if it operates inside of the glove-box, do not use Ar gas
- Bulk samples must be crushed before grinding. Please consider MTI Jaw crusher ( click pic below right )
-
|
Overall Dimensions
| Mill: 386mm(L) x 517.5mm(W) x 283.5mm(H) Speed Controller: 260mm(L) x 170mm(W) x 240mm(H)
|
Net Weight | 40 kg (88 lbs) |
Shipping Dimensions | 27"(L) x 23"(W) x 24"(H) |
Shipping Weight | 135 lbs |