| Working Voltage | Single-phase 208~240VAC, 50/60Hz |
| Max. Power Consumption | 1.2KW |
| Cutting Modes | - • Cut-to-Length: Set the desire cutting length with in
the range of 1~9999mm - • Color Mark Detection Cutting: Allows a printed color
mark on a continuous web to be detected and
therefore for accurate control of downstream cutoff.
|
| Cutting Accuracy | +/- 0.3mm |
| Acceptable Electrode Width | 10~300mm |
| Linear Speed Allowed for Cutting | - • Cut-to Length: 5~250mm/s
- • Color Mark Sense Cutting: 5~150mm/s
|
| Acceptable Electrode Roll Size | Max. 250mm O.D |
Compress Air Requirement |
0.5~0.8MPa (Please note that an air compressor is need for the operation of this machine. Air Compressor is not included. please click here to order or order from your local hardware store)
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
 pic1  pic2
|
| Product Dimensions | L1151 x W715 x H914mm |
| Weight | Approx. 300kg |
| Warranty | - • One year limited warranty with lifetime support
- • Rusting and damage due to improper storage
condition or maintenance is not covered by warranty
|
Operation Manual |
 
|
