MSK-HRP-02 (upgrade from EQ-HRP-02) is a CE Certified precision laboratory calender. It is an ideal tool for preparing PVC, polimer, plastic laminated film and battery electrode sheet in research lab to increase the surface condition and material density. It has a pair of rollers with 215mm diameter, which can be preheated to 55 °C respectively with the tubular heater controlled by PID thermostat with +/- 1 °C accuracy. The motor speed is regulated by an inverter and a 4-digit display to show the present frequency, which is linearly proportional to the motor speed.
•A set of 8.5" (215 mm) diameter rollers to enable uniform sample processing •Roller Width : 280 mm •Material : Carbon Steel •Roller Surface Treament : Surface hardened and polished, the hardness can be HRC 55 (1990 MPa) •Rotational Speed : Adjusted by a digital inverter with a definite speed index •Feeding Speed : 0 - 8 mm/sec adjustable
Heater
•Both top and bottom rollers can be heated respectively •Tubular heater can be controlled by PID thermostat to keep the temperature of the rollers' surfaces uniform and stable •Max. temperature : 55 °C •Temperature Accuracy : +/- 1 °C •Max. Power Consumption : 500 W each
Motor
•Working Voltage : 220 V AC, Single phase •Max. Power Consumption : 373 W (0.5 HP)
Press Gap
•Micro-adjustable from 0.05 - 5 mm •Indicated by two dial gauges with accuracy of +/- 0.01 mm •Rated Press Force: 4000 KGF
Guarded Inlet
A front guard plate for operation safety
Sheltered Outlet
•Built in shelter to prevent foils from falling inside the machine after coating •Shelter can be opened for accessing inside the machine for cleaning
Product Dimensions
480 mm (W) x 520 mm (D) x 500 mm (H)
Compliance
CE Certified
Warranty
•One Year limited warranty with lifetime support •Rusting and damage due to improper storage condition or maintenance is not covered by warranty
•Must use acetone to clean and dry rollers' surfaces after each use to avoid rusting •Apply antirust if machine were to be unused for a long period of time •Sample testing is available upon customer's request