Feature
![](https://www.mtixtl.com/images/products/thumb/air-plasma.jpg)
| - Used for the pre-processing of various substrates. for better coating
- Uses high-frequency and high-voltage electric power to generate corona discharge between the electrodes and produce low-temperature plasma
- Improves the adhesion of the substrate as well as the coating quantity
|
Working Voltage | 220 VAC ± 10%
|
Working Frequency | 8KHz - 21KHz |
Max. Power Consumption | 2 KW |
Max. Treating Width | 200mm |
Safety Measures | - Built-in overload limits for the input voltage, short circuit or open circuit on output, ground, etc.
- Security alarm in case of accident/error occurs.
- Equipped with 100 mm diameter vent port, it can connect the pipeline and eliminate the ozone generated during operation.
|
Electrode & Roller
![](https://www.mtixtl.com/images/MSK-EC-200ms.jpg)
| - Ceramic electrode roller width: 250mm
- Roller width: 300mm
- Maximum processing width: 200mm
- The gap between electrode and roller: 1- 3 mm adjustable
|
Dimension
![](https://www.mtixtl.com/images/MSK-EC-200ms2.jpg)
| - Controller Box: 300mm L x 500mm W x 240mm H
- Roller Unit: 600mm L x 320mm W x 370mm H
|
Application Notes | - Optional roll-to-roll system and coating system can improve the adhesion of the substrate's surface and improve coating quality. Please contact us for more details.
![](https://www.mtixtl.com/images/products/thumb/Airplasma.1.jpg) |
Warranty | - One Year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
Operation Manual | ![](//www.mtixtl.com/images/1-Operation%20Manual.jpg) |
Warning | - This equipment must be placed on a flat and stable working platform.
- Store in a dry environment, avoid moisture and rain.
- This equipment must be grounded during operation.
- Ozone will be generated while the equipment is running, be sure to evacuate the ozone gas.
|