KJT-2V is an automatic pressure control kit for keep chamber at constant pressure from 10Kpa to 230 KPa ( 75 Torr to 1750 Torr , or 0.1 atm --- 2 atm )
Click the pic to enlarge
Complete Package includes
One Pressure Transducer with M14 Male Port
0 - 230 KPa with 1% accuracy
•Two Solenoid Valves with connecting ports of 1/4'' BSPP ( Male ) •One control box with digital pressure Display and controller. 110V - 220VAC power cable and plug included •Canon connectors are pre-installed with transducer and solenoid valve, as well as back of control box. •You just need plug in , then operate
Operation Procedures for controlling tube furnace pressure
•Install one solenoid valve to one end of tube flange, then connect valve to inlet gas tank ( 1/4" I.D rubber hose required ) •Install another solenoid valve to another end of tube flange, then connect the valve to vacuum pump •Install pressure transducer to tube flange •Plug all connector to control box, and plug control box to 110VAC ( or 220VAC ) power source. •Set pressure low limit and high limit on digital controller •Then, tube furnace will keep pressure with desired range accurately