Split Tube Furnace | - Input voltage: 110/220 VAC, single-phase. 50/60 Hz.
- Input power: 1.2 kW.
- Maximum working temperature: 1200 °C (< 60 min).
- Continuously working temperature: 1100 °C.
- Maximum heating rate: 10 °C /min.
- 30 segments programmable precision digital temperature controller.
- Dual 4" (100 mm) heating zone.
- Constant Temperature zone: 100 mm within ±2 °C if two zones at same temperature.
|
Temperature Controller
| - Proportional integral derivative (PID) control.
- Built in temperature and thermocouple failure protection.
- Default D89 BC communication port.
- Temperature accuracy: ±1 °C.
- Heating elements: Fe-Cr-Al alloy doped by Mo.
- RS485 Communications Port.
- Advanced Temperature Control (Optional)
- MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- You may upgrade the temperature controller to the Eurotherm 3204 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3204 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3204 temperature controller.
|
Tube Description | - 2" fused quartz processing tube with mixing blade in center.
- Tube length: 1100 mm.
- Rotation speed: 0 ~ 5 rpm.
Contact us for other tube sizes options. |
Microwave Magnetron | - Input voltage: 110 VAC, single-phase.
- Input power: 600 W (Optional: 1200W, 2100W and 3500W microwave generators are available upon request, additional cost will be applied)
- Frequency: 2.45 GHz
- Continuously working time: 30 mins.
- Air cooling.
- Equipped with an aluminum protective shield and an AC fan to minimize the microwave leak.
|
Pressure Sensor
| |
Vacuum Pump
| - Working voltage: 110 VAC/60 Hz or 220 VAC 50/60 Hz, single phase.
- Working power: 375 W.
- 156 L/min rotary vane vacuum pump.
- Vacuum capability: 10 ^ -3 Torr.
|
Product Dimensions | - Product dimension: 1500 × 500 × 600 mm.
- Furnace: 640 × 300 × 400 mm.
- Microwave generator: 360 × 300 × 600 mm.
|
Warranty | One year limited warranty with lift time support (Consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty, please order the replacement at related products below.) |
Laptop, software & WiFi Control (Optional) | - Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters operating range.
- Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
- Note: The software is only compatible with MTI’s Yudian Temperature Controller
|
Compliance | - CE Certified
- NRTL (UL61010) or CSA certification ia available at extra cost.( please click marks below to learn details )
|
Patten Number: ZL-2011-2-0355777.1 |
Operation Instruction |
|
Warning
Click here to learn the installation of a gas regulator
| - The tube furnaces with quartz tube are designed for using under vacuum and low pressure < 0.2 bars / 3 psi / 0.02 Mpa
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C
- The flow rate for gasses should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube
- MTI reserves right to modify PECVD design at any time without notice but promise that quality will meet the specifications above
|