| Model | MSK-180 (one cutting die included)
| MSK-180L (not cutting die, pls provide die size for quote
|
| Working Table Area | 300mm(L) x 250mm(W) | 400mm(L) x 400mm(W) |
Die Set Dimensions
Customized size die is available upon
request at extra cost
| New: Two standard electrodes (Cathode & Anode) cutting dies are included for immediate use. 2 pcs of electrodes can be produced per cut. (Please change it when getting dull) (NOTE: The standard cutting die sizes have been updated from 81.5 x 47.8mm (cathode) and 81.5 x 48.3mm (anode) since April 2015)
- Cathode Die: 56 (L) x 43 (W) mm with a 14mm (L) x 11mm (W) protruding current collector
- Anode Die: 58mm (L) x 45mm (W) with a 13mm (L) x 11mm (W) protruding current collector
- Customized die with Max. area 280 x 180 mm
 | - A standard cutting die of anode: 196 * 149 mm, cathode: 194 * 147 mm was included. Other customized die sets within 380X380mm are available upon request with an extra cost
- Please provide your desired cutting die size when RFQ
 |
Working Voltage
| INPUT: 24VDC (Since 03/31/2017)
The UL/CSA listed 100 or 220VAC IN - 24VDC OUT power adapter is included | 24VDC input
UL listed power adapter is included |
| Max. Power Consumption | 10W |
Safety Sensor
 |
Built-in IR sensor (Safety Curtain) to protect against hand injuries during electrode feeding |
| Cutting Accuracy | ±0.1mm |
| Air Cylinder | 3 tons Max. pressure
Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator
 pic1  pic2
|
| Tensile Cylinder | 0.15 tons of pressure |
| Feeding | Manually |
| Production Yield | 800 - 2000 pieces of electrodes per hour |
| Compliance | - NRTL or CSA certification is available at $4000 extra.
|
| Warranty | One-Year limited warranty with lifetime support |
| Optional & Upgrade | - You may need a matching case forming machine MSK-120(Please click the picture-1 to view)
- Please order the pre-formed pouch cell case and other accessories by click picture-2/3 below
- For Roll to Roll (R2R) automatic processing function, please check out MSK-180-AM (Pic. 4)
- Please click to order more Consumable Clear Acrylic Sheet from us
|
Operation Video |  How to operate  How to make pouch cells
|
| Air Pressure | Recommend 60 psi (Air compressor is not included Please click here to order) | Recommend ≥0.6MPa (Air compressor is not included)
|
| Product Dimensions | 550mm(L) x 450mm(W) x 900mm(H) | 580mm(L) x 480mm(W) x 1120mm(H) |
Application Notes
| A perfect fit for the cases formed by the standard size of MSK-120, with no rough edge, clippings, or creasings | Updating soon! |
| Net Weight | 120kg (265 lbs) | 140kg (309 lbs) |
| Shipping Weight & Dimensions | 490 lbs; 47" x 39" x 48" | 845 lbs; 47" x 39" x 58" |
-1.jpg)
Pic-1
Pic-2
Pic-3
Pic-4