| Working Voltage | 208-240V AC, 50/60Hz (110V is available via a transformer) |
| Output Power | 1KW |
| Input Air Pressure | 0.1 - 0.8 MPa (Air Compressor is not included. Please Pic. 2 to order)
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
 pic1  pic2
|
| Welding Current | 0-99% Adjustable |
| Welding probes | - Allow independent adjustment for pressure
- Ensure consistent welding pressure
- Fully eliminates the phenomenon of low voltage or condensation occurred to lithium batteries after welding
- Homogeneous welding spot, small spark, and no black spots
|
| Welding Switch | Built-in optoelectronic welding switch, which can eliminate the need of changing switches for similar welding machines |
Controller
| |
| Tab Thickness Applicable | 0.03 - 0.2mm tab (10 pcs 0.2mm Tab will be provided in the package for customer's practice) |
| Warranty | - One year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance is not covered by warranty
|
| Product Dimensions | 800mm(L) x 580mm(W) x 1200mm(H) |
Operation Manual & Video
| 
  |
| Application Notes | - Please click here to learn the basic knowledge of Capacitive Discharge Spot Welder
- Avoid touching weld spots immediately after the weld has been performed as they will be hot
- Always wear safety glasses when working with spot welders and weld heads
- Be careful not to pinch fingers in moving weld head parts or between welding electrodes
- Remove hand jewelry before welding
- Purchase replacement electrode here.
|
| Net Weight | 50 kg (110 lbs) |
