Working Voltage | - • 208 -220V, 50/60 , 3 phases, ( standard )
- • 380V, 50/60 Hz, Three Phase ( optional)
- • 460V, 50/60 Hz, Three-Phase available upon request
|
Max. Power Consumption | 30 KW ( 100A Air breaker required ) |
Coating Method
| Transfer coating method for better density and uniformity ( Pls click Pic below to see detail )
|
Max. Coating Width | 400mm |
Coating Speed | Max. 4 meter / minute |
Thickness Precision | ± 3µm (± 5µm at edges) |
Max. Drying Temperature
| 150°C
|
Temperature Accuracy | ±1°C |
Heating Zone Length | 4.5 Meter ( 3 zones, 1.5 meters per zone ) |
Reeling/Unreeling Shaft
| 75mm (ID) |
Max. Reeling/Unreeling Diameter | 250mm (OD) |
Max. Coating Length
| • Depending on coating and substrate thickness.- • Typically, 10um thick foil with 100um coating can get
600 meters of electrode length coated per run
|
Slurry Stirring
| SS316 Moving Rod
|
Compressed Air
| 0.5-0.8 MPa (Air compressor not included. Please click here to order)
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
pic1 pic2
|
Optional
| You may order Dual-Filtration System for NMP Vapor and connect it to the coating system for keeping environmental healthy.
|
Product Dimensions
| L6500mm x W1200mm x H 1600mm
|
Compliance
| • CE Certified All electric components ( >24V) are UL / MET / CSA certified- • The furnace is ready to pass TUV(UL61010) or CSA
certification at extra cost.( please click mark below to learn details )
|
Warranty
| • One Year limited warranty with lifetime support- • Rusting and damage due to improper storage
condition or maintenance are not covered by warranty
|
Operation Manual & Video |
|
Application Notes | • Please use Acetone to clean and dry the doctor blade, slurry feeder, and roller to avoid rusting- • Customers are welcome to visit our facility to receive
technical training before shipping of equipment (Please schedule an appointment with us in advance) - • On-site Training is available for customers within the
US only (Expenses will be covered by customers)
- • Test the flexibility of the coated electrode with EQ-MBT-
12-LD mandrel bending tester. ( Click pic.1 below for detail.) - • PET Film with single side Si Coating is available for
Roll-to-Roll tape /slot die/ Micro Gravour casting of Li- ion battery electrode slurry, ceramic, functional resin, ink, and others. Please click the Pic.2 in below to view the product. Pic.1 Pic.2 |
Net Weight | 1000 kg |
Shipping Dimension | TBA |