Working Power | - AC 208 - 240 V
- 50/60Hz, Single Phase
- 6 KW (40A Air breaker required)
|
Coating Method
| - Blade Coating technique
- Coating Thickness Precision: +/- 0.003 mm
- The coating thickness precision depends on the coating material.
|
Max. Coating Width | 250 mm |
Coating Thickness Range | - 3 - 50 um
- For most kinds of battery electrode coating materials
- It depends on the wire rod, the physical property of the coating material, substrates, and coating speed
|
Thickness Precision | ± 3 µm
|
Max. Drying Temperature
| 150°C
|
Temperature Accuracy | ± 1°C |
Heating Zone Length | 800 mm (30") |
Reeling/Unreeling Shaft
| 75 mm (I.D.) |
Max. Reeling/Unreeling Diameter | 300 mm (O.D.)
|
Max. Coating Length
| - Depending on the coating and substrate thickness.
- Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run
- Optional: You may need a slurry pump to feed slurry into the dipping container and to make long coating
 (optional: click the picture to order)
|
Exhaust Port Size | 127mm O.D. |
Compressed Air | 0.5-0.8 MPa (Air compressor not included. Please click here to order)
Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
 pic1  pic2
|
Product Dimensions |  1000mm (L) x 1000mm (W) x 1750mm (H)
|
Compliance | - CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost.
 
|
Warranty | - One Year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
| Operation Manual & Video |   |
| Net Weight | 1,500 kg (3,300 lbs) |
| Shipping Dimension | 70" x 45" x 55" |
Application Note | You may order Dual-Filtration System for NMP Vapor and connect it to the coating system for keeping environmental healthy. Please click Pic.below for details.
 |
