Main Features
|
• 500 ~ 10000 RPM spinning speed programmable- • Accept substrate from 5 mm to 5"
- • PP chamber for anti-corrosive operation.
- • One gas inlet port on top of the cover which can fill inert gas
during coating - • One 20ml Plastic Syringe is included
- • Suitable using Ar gas ( vacuum pump must be outside glovebox)
- • The safety interlock is integrated into the lid
|
Vacuum Chuck
|
• Chamber size: 150 mm diameter
- • 2 sets of PP anti-corrosive vacuum chucks with different
sizes (O-ring ID Φ44mm, Φ10mm), which can hold substrate
from 5 mm to 5" Dia. ( see pic below )
- • Click the picture below right to watch demo video for how to
use 9mm vacuum chuck hold 5mm sample.
  
|
Vacuum Pump |
• One 120L/min Oilless Vacuum Pump is included in the
standard package, please click the picture below for
specification details. (Pic.1)
- • Vaccum grade rubber pipe is included for immediate use.
- • For Ar glove box user, a feedthrough is required for
connecting the spin coater to the vacuum pump outside of the
glovebox. The feedthrough is NOT included in the standard
package, please contact us for more information.
-
|
Programmable Control
|
• Duration up to 60 seconds- • Acceleration: 100 - 2000 rpm / sec adjustable
- • Accuracy: < 5%
- • The digital control panel can store 12 programs and each
program has 6 segments programmable for speeds,
acceleration, and spin duration (please click picture below-
right to see typical program setting)
|
Input Power |
• AC 220V (Please email us for AC 110V Version)- • 1000 W total for the oilless pump and spin cater
- • 24VDC high-speed motor
|
Gas Inlet |
6mm diameter gas inlet port allows customers to fill desired gas into the chamber, which can make coating under variable gas flow environment.
|
Liquid Injection
|   
|
Optional
|
• Option 1: PE Heating cover with digital temperature controller up
to 120°C(<10 minutes) is available upon request at extra cost.
This is a short drying process (usually takes several seconds or
Max.10 minutes) which can dry and solidify the coating and
remove the residual solvent after the coating process is
completed. Click demo video & picture below for detail.
- • Option 2: PTFE Heating cover + PTFE vacuum chuck set is
capable of drying temperature up to 200°C(< 5 minutes).
Vacuum chuck and chamber also need to be replaced by PTFE
material to withstand high heating temperature. Please
click PTFE Heating cover and chuck set to learn.
- • Option 3: UV lighting Cover with the controller for drying
polymer film quickly (New)
-
 P1  P2  P3
|
Product Dimensions |
450mm Depth ×280mm W ×340mm H
|
| Net Weight | 20 kg
|
Operation Manual &
Video | |
Application Notes |  
|
Warranty &
Compliance |
• One year limited with lifetime support
- • Rusting and damage due to improper storage condition or
maintenance are not covered by warranty
- • CE Certified
- • NRTL or CSA certification is available at the extra cost.
|
Warnings |
• Do not overflush the water bowl/base with any kinds of liquid.
Excess liquid will leak into the motor shaft and cause damage.
Please use fabric cloth to wipe out the residues remain in the
bow/base.
- • If necessary, turn on the water outlet when flushing the water
bowl/base to avoid liquid overflowing during the operation.
- • For more details about the cleaning procedure, please review
the cleaning instruction for the spin coaters.
|
| Shipping Dimensions | 40"(L) x 30"(W) x 30"(H) |
| Shipping Weight | 46 kg (100 lbs) |
