Power | • 208V- 240VAC standard, 500W- • To use the unit at 110 V, please order 500W
transformer,
|
Control Panel
| • Driving Force is adjustable by air cylinder valve.
- • Digital Display for impact force on control panel
- • Minimum 100 PSI air compressor with 2 gallons
tank is required to drive the machine - ( Air Compressor is not included, Please order it at local or order separately by clicking underlined)
- • Please click picture to the left to view details.
- • Attention: If a gas cylinder is used instead of
air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
pic1 pic2
|
Penetration Force | • 0 ~ 500 kg- • Suitable for single cell and small battery pack.
|
Steel Nails
| • Seven steel nails (HSS) (2mm, 3mm, 4mm, 5mm,6mm, 7mm & 8mm diameter) are included in the standard package,Please click the picture on the left to view details. - • Other diameter nails can be ordered upon request.
|
Penetration Speed | 0~80mm/s adjustable |
Dwell Time | 0-9999 seconds
|
Working temperature | RT ( room temperature ) |
Operation Chamber
| • Chamber inside is made of stainless steel to resist fire and easy to clean.- • There is a front observation window which is made
of double layers high strength glass. - • Chamber size: 16" x16 "x 16" ,
( 400 x 400 x 400mm ) - • One clamp driven by compress air can hold sample
tightly - • Max. sample size can be accomodated: 8"x8"x8"
(200 x 200x 200 mm ). - • Please click the picture to the left to view details.
|
Features on the back
| • Easy electrical connection with the control stage- • One exhaust fan is built inside of the chamber to
remove smoking. - • Air venting port is 145mm in diameter, which must
be connected to vent port in your lab via a tube ( not included, please order at local hardware store ) - • Quick connection for 8mm O.D compresses air
tubing - • Two side ports allow electrical cables pass through
- • Pressure release door prevents pressure built up
inside the chamber
|
Machine dimension | 36"L x 20"W x 58" H (920x 510x1470 mm )
4 mobile wheels are installed at the bottom and allow an easy move.
|
Operation Video |
|
Net weight: | 330 lbs ( 150Kg) |
Shipping weight | 600 lbs |
Shipping Dimension | 47" x 40" x 71" |
Warranty
| One year limited with lifetime support |
Compliance | |
Application & Safety Note | • The max. capacity of Li-Ion batteries to be tested in the chamber should be limited to 4.2V@ 40Ah for single cell or 160Wh for battery pack without protection circus
- • The Machine must be put in the isolated fire-poof
room or fume-hood with venting & extinguish system。 - • Operation unit shall be located in outside room or
fume-hood
|