Chip sealed in Al can which is vacuum-sealed in Al bag
Use
Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox).
Shipping Limitations
Shipments of lithium foil are described as “UN 1415, Lithium, 4.3, PG I". All shipments are Hazard Class 4.3 and require “Dangerous when wet” labels. Sea Class 4.3 (IMDG) Road, Rail Class 4.3 11a (RID/ADR)
Safety Data Sheet
Operation
Package must be open inside a glove box with Argon Gas and moisture less than 2%RH.
Notes
- MTI only sells Li chip within the USA and does not accept international order due to restrictions on hazard material exportation!!!
- MTI reserves the right to charge an additional handling fee due to special shipping/handling requirements.
- Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully.
- Lithium chip may be oxidized during handling and storage. if you find any oxidation on the surface of Li-chip, please use sandpaper to remove it before using.
- The chip will have a passivation layer, from our customer experience, remove the passivation layer will increase your battery capacity
- The lithium chips were packed in the dry room with <2%RH. Therefore, a slight increase of O2 PPM level might be seen in the glove box when the can is opened. Please keep purging the glove box with ultra-high purity Ar until required O2 PPM level is reached.
