Max. Pressure | 40 Metric Tons |
Bottom Hydraulic Cylinder Travel Distance | 0 - 16 mm |
Top Support Screw Adjustable Height | 170 mm |
Hydraulic Cylinder Diameter | 80 mm |
Max. Working Space | 80 mm Dia. x 170mm H |
Gauge Pressure vs Cylinder Force
|
Pressure Display on gauge (MPa) | 5.6 | 11.4 | 17.0 | 22.8 | 28.4 | 34 | 39.8 | 45.4 | Force on Hydraulic Cylinder (T) | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
Calculation: Force on Hydraulic Cylibder ( T ) = 0.88 Gauge (MPa)
|
Protection Cover
| • Polycarbonate Safety Shield is included in standard package.- • Note: Door must be closed during use
|
Dimension | 240×170×600(L*W*H), mm
|
Dimensions of Machine | 160mm(L) x 330mm(W) x 470mm(H) |
Net Weight of Machine | 55 Kg (121 lbs) |
Shipping Dimensions | 39"(L) x 31"(W) x 35"(H) |
Shipping Weight | 185 lbs |
Press Dies optional | Pressing dies with various diameters are available upon request at extra cost. Please click Picture below to choose dry pressing die
Heatable die
|
Electric pump optional | The manual pump can be replaced by the electric pump which has programmable pressure control.
|
Operation Instructions |
|
Warranty | • The pressing machine was quality inspected in the USA, lifetime support is provided- • One year limited standard warranty (Extended warranty is available up to 5 years at extra cost)
|
Warning
| • The pressing die cannot be used for pressing powder with the particle size < 30 microns. Small particles may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns power to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps.- • Please clean the pressing die using ethanol after the completion of each experiment.
- • Customer must always wear protection goggles during operation.
- • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (MAX.25mm)
- • Operate the presser inside the glove box is not recommended
- • Idel long time and back to use need to check the eliminate the air and check the oil level.
|