Programmable
Electric Hydraulic Pump
|
• 208-240VAC, 50/60Hz (110V version is available via 1000W transformer)- • 180 W AC motor
- • Built-in digital pressure controller, which is 30 segments programmable to set up multi-pressure and pressure
dwell time - • One pump speed controller is built in to adjust pump speed
- • One KF40 feed-through installed on the pipe, which allows the pipe is inserted into a glovebox and connect to
press machine
 
|
| Max. Pressure |
• 40 Metric Ton for pressing machine- • 45 MPa for the electric pump
- • Transparent protection cover is built in the front of pressing machine
|
| Hydraulic Oil | |
| Hydraulic Hose | |
| Optional KF-40 feedthrough |
• A 3 meters long hydraulic hose with a KF40 feedthrough flange is optional which allows the machine to work
inside the glove box.
|
| Bottom Hydraulic Cylinder Travel Distance | |
| Top Support Screw Adjustable Height | |
| Hydraulic Cylinder Diameter | |
| Max. Working Space | |
| Gauge Pressure Value to Force Conversion |
Pressure Display on the gauge (MPa) | 5.6 | 11.4 | 17.0 | 22.8 | 28.4 | 34 | 39.8 | 45.4 | Force on Hydraulic Cylinder (T) | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40
|
P = T x g x 10/ (πr^2) - • P: pressure (Mpa) applied to your working piece
- • T: force (metric ton) applied to the pressure vessel cylinder
- • g: standard gravity. g ≈ 9.8 m/s2
- • π: ~3.14
- • r: radius (cm) of the pressure vessel (1.5 cm)
- • *1000 Kg = 1 Metric Ton; 1 Mpa = 10 Kg/cm2
|
| Pressure Accuracy | |
| Operation Temperature | |
Overall Dimension
|
|
| Pressing Die (Optional) |
Pressing dies with various diameters are available upon request at an extra cost
|
| Net Weight | |
| Shipping Weight & Dimension | |
| Compliance | |
| Warranty |
• The pressing machine was quality inspected in the USA, lifetime support is provided- • One year limited standard warranty (Extended warranty is available up to 5 years at an extra cost)
|
| Operation Video and Instructions |
 
|
| Application Notes |
• The pressing die cannot be used for pressing powder with a particle size < 30 microns. Small particles
may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the
compression. Ball mill and sieve the powder and apply only the 32~75 microns powder to the pressing
die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the
32~75 microns particles from the powder clumps. Please clean the mold via ethanol after the completion of
each experiment
- • Do not raise the bottom cylinder (piston) more than its maximum traveling distance (25 mm)
- • The press can be put in a glovebox
  
- • Warning: Customers must always wear protective goggles during operation !!!
|
