Working Pressure Range | |
Gauge Pressure Value to Force Conversion |
Gauge Displayed Pressure Value (Bar)
| 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | Actual Force Applied on the Hydraulic Cylinder (Ton) | 1.9 | 3.8 | 5.8 | 7.7 | 9.6 | 11.5 | 13.3 | 15.4 | Actual Pressure Applied on 0.5" ID Die (MPa) | 147 | 294 | 441 | 588 | 735 | 882 | 1029 | 1176 |
Notes:
- • Displayed Pressure Value to Actual Applied Force Conversion: 26 bar = 1 Ton
- • The actual force applied on the Hydraulic Cylinder (Ton) equal to the force applied on your working piece
- • For calculating the actual pressure (MPa) applied on your working piece, please follow the equations in below:
P = T/(πr^2) x g x 10
- º P: Pressure (MPa) applied on your working piece
- º T: Force (Ton) applied on the Hydraulic Cylinder
- º g: Standard gravity. g ≈ 9.8 m/s2
- º π: ~3.14
- º r: Radius (cm) of the working piece
- º *1 Metric Ton = 1000 kg; 1 MPa ≈ 10 kgf/cm2
|
Pressure Stability | |
Heatable Dies
| • 0.5" ID heatable dies with high strength tool steel of hardness >RC60- • Optional:
- º Die with electric insulating BN liner is available at extra cost for researching sample's
conductivity vs pressure ( See Pic 1 below). BN liner is consumable, which only can be used one time ( order spare BN by click Pic 3) - º If use BN liner, the special die with 10.75 mm ID die must be ordered together ( click pic 2 below)
- º For larger heatable dies such as 1.5" ID, please choose the 40T electric hydraulic CSP press
YLJ-CSP-40A
Pic 1 (Pic 2) Pic 3
|
Working Temperature Range | |
Temperature Control
| • 30 segments programmable digital temperature controller with overheating protection- • PID auto-tune function with +/- 1 ºC stability
|
Power | |
Bottom Hydraulic Cylinder Travel Distance
| |
Top Support Screw Adjustable Height
| |
The dimension of Working Space Under Frame
| D1: 120 mm D2: 70 mm D3: 124 mm H1: 180 mm H2: 155 mm
|
Heatable Die Dimension | |
Press Dimensions | 330 mm L x 190 mm W x 410 mm H
|
Net Weight | |
Warranty | - • The pressing machine was quality inspected in the USA, lifetime support is provided
- • One year limited standard warranty (Extended warranty is available up to 5 years at extra cost)
|
Compliance | - • CE Certified
- • NRTL certification is available at extra cost
|
Application Notes | • Preparation of LAGP Sheets by Cold Sintering Process (CSP)- • Thoroughly clean the die pieces immediately after the use to avoid corrosion from the cold sintering
process! - • To avoid pressing die cracking, assemble all the pressing die pieces without the sample before the CSP
experiment and pre-heat them without applying pressure. - • The pressing die cannot be used for pressing powder with a particle size < 30 microns. Small particles
may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns power to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the mold via ethanol after the completion of each experiment.
- • Warning: Customers must always wear protection goggles during operation !!!
- • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (13 mm)
- • This compact press can be placed inside various glove boxes for cold sintering process of air
sensitive materials under inert gas
|
Operation Instructions | LAGP Sheet by CSP Press Operation Video
|