MSK-SFM-1 (upgraded from EQ-SFM-1) is a Planetary Ball Mill designed for mixing, fine grinding, and preparing small volume high-tech material production, which features with small volume, high efficiency, low noise and Lock clamps. If choosing with optional vacuum jar, it can grind samples under the vacuum condition or filled with inert gas. The product is extensively used in the fields of Geology, Mining, Metallurgy, Electronics, Construction Material, Ceramics, Chemical Engineering, Light Industry, Medicine, and Environmental Protection, etc.
MSK-SFM-1 has four ball grinding tanks installed on one turning plate. When the plate rotates, the tank axis makes the planetary rotation in opposite directions and the balls in the tanks grind and mix samples in high-speed movement. The product can smash and blend various products of different materials and granularity with dry or wet methods. (Note: granularity of grand products is dependent on the material properties, size, and quantity of milling media and processing time. According to customer's feedbacks, minimum granularity can be as small as 0.1 um).
Note: How to achieve finer or desired particles via ball mill is a research project, which is depended on the material to be mixed, grinding time and speed, combination of grinding jar and milling ball, etc. It is your responsibility to find the best milling procedure based on your material. Welcome you come to MTI lab at California to do test before purchase
Sieves
• 1 pcs 14 mesh for separating samples is included
• In order to mill efficiently, material particles shall be less than 14 mesh (1.12mm)
Warranty
• One year limited warranty with lifetime support
• Consumable parts, such as Nylon jar and grinding ball, are not covered by the warranty
Compliance
• CE Certified
• NRTL certification is available at extra cost
Production Dimensions
• 450mm(L) x 490mm(W) x 530mm(H)
Net Weight
• 220 Lb
Operation Manual and Video
Operation Demo Video Lock Clamps Video
Application Notes
• SS304 mixing jar is suitable for grinding various metal materials
• For milling the oxide material, please choose alumina/Nylon jars and zirconia media. DO NOT USE stainless steel balls in Alumina jars.
• Must place 4 jars or 2 in symmetrical with similar weight in the ball mill to keep balance during rotation, If using one jar, you must put another jar with the same weight in a symmetrical position. Otherwise, unbalance rotation, especially one jar, may damage the machine.
• If you need forced air cooling jar for some ductile materials, please click the picture below to order a Portable Spot Air Cooling Conditioner, which will keep milling jar 's temperature below 30°C
