Features
 
|
• Highly efficient milling system that combines bead milling and centrifugal separation- • Wear and corrosion resistant design for metal free processing with milling chamber and rotor
made of ceramic - • Self circulation with a closed system for circulation and multi-pass milling operation
- • High purity zirconia milling balls are included for immediate use
|
Input Power |
• 208 - 240 VAC, 50 Hz, single phase.- • 110VAC version is available via 1500W transformer
- • 1.1 KW power
|
Milling Operations
|
• Motor speed: 600 - 2880 rpm programmable- • Milling chamber capacity: 300 mL
- • Milling chamber material: Zirconia
- • Milling rotor design: Peg grinding system with small length/diameter ratio
- • Milling rotor material: Zirconia
- • Milling media size: 0.3 - 1.4 mm
- • 0.7 kg 0.3-0.4 mm high purity milling media is included, which fills up to 70% of the chamber
- •
 
|
Milling Media
|
• 0.7 Kg 0.3 mm diameter YSZ mill ball is included for immediate use,- • Other sizes YSZ mill ball is available upon request.
- • Usually, Milling ball vs Material is 7:3, and small output particle requires smaller milling ball.
- • Warning: Max. the mill ball size is 1.4 mm ( Larger ball may damage mill chamber).
It is the customer responsibility to find the best parameter for your own sample by experiment.
|
Self Circulation |
• Self-circulation with a closed system for circulation and multi-pass milling operation- • Separation filter net material: Tungsten Steel
- • Separation filter net pore size: <0.3 mm
|
Cooling
| |
Size
|
•  600 mm L x 600 mm W x 850 mm H
|
| Net Weight | |
| Warranty | - • One year limited warranty with lifetime support
|
Operation Instructions
|
|
Application Notes |
• Always use the equipment on a level & stable surface for best performance and maximum
safety- • If the liquid is spilled on the unit, first disconnect the unit from external power and then clean
the unit with a cloth - • The equipment is NOT intended to use for dry milling of powders!
- • To avoid powder clumps and achieve best milling results, 1) sieve the powder prior to milling,
2) mix milling media of different sizes and do the milling
|
