Structure
|
• Case and the spin disk made of Polypropylene (PP) to resist most of the corrosive solutions.- • The digital control box is separated from spin coater.
- • One two-stage vacuum pump is included in the standard package; please click here for
specification details. - • The digital vacuum gauge is installed on the top cover of the spin coater
- • One filter is included in standard package. It is used to connect the pump and coater for
preventing wastewater from flowing into the pump. - • The sample can be held either by the mechanical fixture ( vacuum injection or vacuum
( for inert gas )
|
Input Power |
• Default 220VAC, 50/60Hz, single phase, 1000W Max.- • 110V is available in the optional bar ( with 1500W transformer )
- • A power socket on the back of the Digital control box is used to supply power to the vacuum
pump. (The output voltage of this power outlet depends on the input voltage of the spin coater,
e.g. if the spin coater is plugged into AC 110V, this power socket will supply AC 110V.)
|
Chamber & Vacuum Chuck |
• Chamber diameter: 150 mm- • PP anti-corrosive chuck which can hold substrate up to 6" Dia. either by vacuum or by the
mechanical fixture - • Vacuum chuck only can be used at inert gas atmosphere
- • Mechanical chuck must be used for vacuum injection
|
Vacuum | |
Spin Speed
|
• Digital control panel with six programmable segments of different spin times and speeds- • Maximum programmable spin time 6*60s = 360s
- • 500 - 6000 RPM adjustable spinning speed at each segment
|
Liquid Injecting
|
• 20mL syringe is used to contain the coating material (Click Pic 1)
 - Pic 1
|
Optional
|
• Heating cover with digital temperature controller up to 120 ℃ is available upon request at extra
cost ($1950), which allow sample drying in-situ during and after coating (Click Pic 1 & 2)
 - Pic 1  - Pic 2
|
| Motor | 24VDC, Brushless, 200W max.: |
Product Dimensions
( click picture right to see details) |
 Coater: 250mm Dia x 590mm (H)
Control Unit: 330mm(L) x 380mm(W) x 165mm (H)
|
| Net Weight | 25 kg |
Compliance |
• CE Certified- • NRTL certification is available upon request at extra cost
( Please notice us before ordering if you need NRTL )
|
Warranty |
• One year limited with lifetime support- • Rusting and damage due to improper storage condition or maintenance are not covered by
warranty
|
Operation Manual & Video |
  
|
Warnings |
• Do not overflush the water bowl/base with any kinds of liquid. Excess liquid will leak into the
motor shaft and cause damage. Please use fabric cloth to wipe out the residues remain in the
bow/base.- • If necessary, turn on the water outlet when flushing the water bowl/base to avoid liquid
overflowing during the operation. - • For more details about the cleaning procedure, please review the cleaning instruction for the spin
coaters.
|
| Shipping Dimensions | 40"(L) x 30"(W) x 30"(H) |
| Shipping Weight | 46 kg (100 lbs) |
