• 
       •  Double layer steel casing with air cooling keeps furnace surface temperature lower than 60°C.  
•      •  High purity fibrous alumina insulation for maximum energy saving.
•      •  The special refractory coating on liner and heating element to increase furnace life.
•      •  Split cover with Interlock protection, cut the power if door open during furnace heating process.
  
  

• 
       •  Fe-Cr-Al Alloy doped by Mo
•      •  Max. heating temperature: 1200°C
          (N2 or other inert gas must be filled inside the tube to resist deformation)
•      •  Continuously heating temperature: 1100°C
•      •  Heating rate: 20°C /min Ma
•      •  Thermal Couples: K type 220mm (8.7") Length with Ceramic Sheath, please click the link to
            order spare.
  
  

• 
       •  Total heating zone length: 440mm (~ 18")
•      •  Constant temperature zone: 150mm (+/1°C)
•      •  Please click the image below to view the temperature distribution at 980°C.

                      

• 
       •  FA-YD518P-AG temperature controller is included.
•      •  Proportional–integral–derivative control (PID control) and auto-tune function
•      •  30 segments programmed with ramping, cooling and dwelling steps
•      •  Built-in over-temperature alarm and thermocouple failure alarm
•      •  +/- 1 ºC temperature control accuracy
•      •  Default DB9 PC communication port
•      •  MET Certified
  
  

• 
       •  MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop
          package is available at the options bar. 
         Click for the detail information about the MTS02-Y software kit.
  
•      •  You may upgrade the temperature controller to the Eurotherm 3204 Temperature
          Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3204
           programmer, a communication cable (RS485 - USB) and a software CD.
           Click the pic below to view the full spec of Eurotherm 3504 temperature controller.         
   

• 
       •  Two fibrous ceramic tube blocks are included for blocking heat radiation from inside tube.
          (Ceramic blocks must be fully inserted into the furnace chamber before heating)
•      •  Quartz blocks (optional) are ideal for cleaner processing environment and higher vacuum
           efficiency.
•      •  You may order flange support to avoid tube rotating ( click Pic below right )
  
  

            

• 
       •  One pair of SS 304 vacuum flange is included
•      •  Left flange:
•          º  one thermal feedthrough (for 1/4O.D sheathed thermocouple)
•          º  one needle valve
•          º  one mechanical vacuum gauge -0.1Mpa to 0.15Mpa
•          º  one barb fitting ( click PiC, below left-2 for detail)
•      •  Right flange:
•          º  one KF-25 vacuum port  and one needle valve.

         

•      •  An anti-Corrosive gas-type independent (above 10mbar) digital vacuum gauge with a wide
          range between 3.8x10^-5 to 1125 Torr is optional. Aside from greater measurement precision,
          this gauge reduces risks of chamber explosions caused by the incorrect reading of gas
          pressures due to gas-type dependency.

•      •  The flange with quartz window is available for in-situ Raman or Mossbauer analysis

                

• 
       •  10E-2 torr by quality mechanical vacuum pump
•      •  10E-5 torr by the turbo molecular pump.
•      •  The vacuum pump is optional. Please click here to choose a vacuum pump.

                

• 
       •  Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for
          immediate use.
•      •  Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature
          profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
•      •  A wireless remote control provides up to 300 meters operating range.
•      •  Above features are available upon request at an extra cost (up to $1,000). Please contact us
          for more information.
•      •  Note:  The software is only compatible with MTI’s Yudian Temperature Controller
  
  
•            
  
  

• 
       •  Tube furnaces with quartz tubes are designed for using under vacuum and low pressure < 0.2
          bars / 3 psi / 0.02 MPa. Vacuum pressures may only be safely used up to 1000°CThe flow rate
          for gasses should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the
          tube
•      •  Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit
          the pressure to below 3 PSI for safe operation. 
          Click here to learn the installation of a gas regulator.
•      •  Heating module is consumable.  Please click picture below-right to order a replacement.
•      •  The furnace with Sliding flange is available

             

EQ-F-T-block-62

EQ-FL-70

EQ-QZTube-70G-1000