| Part No. | OTF-1200X-4-HNG |
| Fused Quartz Tube Size | O.D: 101 x I.D: 92 x Length: 1000 mm |
| Furnace Structure |
• Double layer steel casing with air cooling to keep furnace surface temperature lower than 60°C. - • High purity fibrous alumina insulation for Max. energy saving.
- • The special refractory coating on the inner and heating element to increase furnace life.
- • Two Quartz tube blocks are included for blocking heat radiation from inside tube.
( blocks must be fully inserted into the furnace chamber before heating)
|
| Input Voltage | 208 - 240VAC SINGLE PHASE, 50/60Hz |
| Power | 2.5KW |
| Heating Elements | Fe-Cr-Al Alloy doped by Mo |
Heating Temperature
|
• Max. heating temperature: 1200°C < 1 hours
(N2 or other inert gas must be filled inside the tube to resist deformation)- • Continuously heating temperature: 1100°C
- • Heating rate: 20°C /min Max.
|
| Heating Zone | Total heating zone length: 440mm
Constant temperature zone: 150mm (+/-1°C） |
| Temperature Controller |
• MET certified 30 programmable segments for precise control of heating rate, cooling rate and
dwell time.- • Built in PID Auto-Tune function with overheating & broken thermocouple protection.
- • Over temperature protection and alarm allows for operation without attendant(s).
- • +/- 1 ºC temperature accuracy.
- • RS485 Communications Port.
 
|
Advanced Temperature Control (Optional)
 |
• MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package
is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- • You may upgrade the temperature controller to the Eurotherm 3504 Temperature
Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504
programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to
view the full spec of Eurotherm 3504 temperature controller.
|
Hinged Type Vacuum Flange
& Fitting | |
| Vacuum Level |
• 10^-2 torr by mechanical vacuum pump.10^-5 Torr by a molecular pump.
- • Leak rate < 5 mtorr / min.
|
| Optional |
You may order vacuum pump and accessories to build a complete vacuum furnace system as the pictures below, and please click Furnace Accessories to order these parts.  
|
| Product Dimensions | Furnace: 590×380×520mm |
| Net Weight | 40Kg |
| Shipping Dimensions | 45 x 45 x 35 inch |
| Shipping Weight | 300lbs |
Warranty
| One year limited warranty
Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty
Please order the replacement at related products below |
| Laptop, software & WiFi Control(Optional) |
• Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for
immediate use.- • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature
profile, manage heat-treatment recipe, record and plot data for MTI furnaces. - • A wireless remote control provides up to 300 meters operating range.
- • Above features are available upon request at an extra cost (up to $1,000). Please contact us for
more information. - • Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
Compliance
|
• CE Certified- • All electric components ( >24V) are UL / MET / CSA certified
- • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.
（ please click marks below to learn details )
    
|
Notes
| |
Application Notes
Click here to learn the installation of a gas regulator
|
• The tube furnaces are designed for using under vacuum and low pressure < 0.2 bars / 3 psi /
0.02 MPa- • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit
the pressure to below 3 PSI for safe operation.
Click here to learn the installation of a gas regulator. - • Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely
used up to 1000°C - • The flow rate for gasses should be limited to<200 SCCM (or 200ml/min) for reducing thermal
shocks to the tube
|
| Operation Instructions |  |
