Furnace Structure
| |
| Power | 3.0 KW Max. (20A breaker required) |
| Voltage | AC 208-240 Single Phase, 50/60 Hz |
| Max. Temperature | 1100°C (< 1 hour) |
| Continuous Temperature | 1000°C Max. |
| Max. Heating Rate | <= 10°C /min |
| Processing Tube | |
Heating Zone Length
|
• 12 " (300mm), single zone- • Constant Temperature Zone
- 100 mm length (+/-1ºC ): (click drawing below for temp profile)
- 140 mm length (+/-2ºC ): (click drawing below for temp profile)
|
Processing Tube | |
Temperature controller |
• PID automatic control via solid state relay with 30 steps programmable- • Built in Over Temperature and Thermocouple Failure Protection
- • Temperature Accuracy: +/ - 1°C
- • Optional: The furnace may be operated by PC with installing a control module.
Please order an MTS02-B control module at an extra cost
 
|
Vacuum Sealing
  Left Flange Right Flange
|
• 5" flange with Support Fixture, with supporting fixture, it is easy to remove one flange lid and
quickly load sample. Water cooling flange is availiable at an extra cost- • Vacuum gauge, gas inlet valve, and spare 1/4 thermal couple feedthrough are built in left side
flange. - • H2 gas burner tube is built in right side flange
-
   
|
Hydrogen Detector System
 (included)
|
• One Honeywell UL Approved Sensepoint Gas Detector is Integrated into the system.- • Working Temperature Range: 40ºF to +149ºF (-40ºC to +65ºC)
- • Alarm Point: H2 Limited Explosive Line 10% (10% LEL). Once detecting H2 gas beyond
the point, it will shut off the inlet valve to the H2 automatically
|
Gas-outlet Flow-meter
|
- • One 1000 ml/min floating meter is installed on gas-outlet end for adjusting gas flow rate
• 1/4" Dia stainless steel tube is installed for burning hydrogen gas during gas flowing • One long lighter is included in the standard package for igniting hydrogen gas manually • One 6" long neck flexes safe lighter is included for lighting hydrogen gas
|
Dimension
|
• Main furnace with lid closed: 440mm(L) × 440mm(D) × 460mm(H) \- • Main furnace with lid open : 440mm(L) × 440mm(D) × 700mm(H)
- • With flange support (260mm each), total: 960mm(L) × 650mm(D) × 700mm(H)
- • Temperature Controller Unit: 260mm(L) × 350mm(D) × 410mm(H)
|
| Net Weight | 50 Kg |
| Shipping weight | 200 lbs |
| Dimension after crafting | 228 lbs; 48"x40"x37" |
Warranty |
One year limited warranty for electrical and mechanical parts
Attention: A free course of safety operation training at MTI field is required to purchase this furnace. A customer's side training is also available upon request at extra cost. If the users believe that they have sufficient experience and knowledge to handle the furnace in the dangerous or emergent situation, a liability release agreement must be signed at the purchase. MTI Corp. is not responsible for any damages caused by misuse without the safety operation training. Any damages caused by the corrosive and acidic gases are not under the coverage of the MTI One Year Limited Warranty.
|
Compliance |
• CE Certified- • NRTL or CSA Certification is available upon request at extra cost
-
   
|
Warning
Click here to learn the installation of a gas regulator
|
• Tube furnaces with alumina tubes are designed for using under vacuum and low pressure
< 0.12 atm (absolute pressure)- • The flow rate for gases should be limited to < 200 SCCM (or 200 ml/min) for reducing thermal
shocks to the tube - • Attention: A two-stage pressure regulator must be installed on gas cylinder to limit the
pressure to below 3 PSI for safe operation.
Click here to learn the installation of a gas regulator. - • Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely
used up to 1000°
|
