Working Voltage

• 
       •  220V 50/60Hz, Single Phase (110V version is available at extra cost)
•      •  1500W Max.

• 
       •  Two-columns of Molecular sieves are Built-in in the system. One is for removing oxygen and
           another is for removing moisture up to < 1 PPM
•      •  Regeneration Temperature Controller is built-in for automatically regenerating the filters
•      •  The automatic pressure control system is built in to keep the pressure at a constant level
•      •  6" color PLC touch panel is included which can set and display the humidity and pressure level
•      •  Oxygen sensor and moisture sensors are selectable according to customer budget:
•          º  Purification without any sensor to save the cost
•          º  Purification with H2O sensor only for a dry glovebox in battery research
•          º  Purification with O2 sensors only for monitoring O2 content in CVD or crystal growth
              furnace
•          º  Purification with both O2 and H2O sensors for the standard glovebox and every
•             application.
  
  

• 
       •  Two 304 stainless steel KF40 ports for inert gas inlet/outlet recirculation through the filter
•      •  One heavy-duty vacuum pump, 240L/m is included in this system: EQ-YTP-550 
•      •  Note: You need to order two sets of 1000mm length SS Bellows: KF-40 to the KF-25 Reducer
          Union, KF-40 & KF-25 quick clamp to connect the purification system to MTI's VGB-3 or VGB-
          4A glove box. KF-40 to the KF-25 Reducer Union are available at extra cost
          (Please click on the third picture below for details)

                         

• 
       •  Working gases: Atmospheric gases, N2, Argon
•      •  Regeneration Gas: N2
•      •  One flow meter is included for accurate gas filling
  
  

•      •  60 kg (135 lbs)

•      •  960mm(L) x 700mm(W) x 800mm(H) (38" x 28" x 32")

•      •  1100mm(L) x 815mm(W) x 1200mm(H) (44" x 32" x 47")

 
      

     (1)     (2)       (3)        (4)

1.    1. Annealing Ti alloy with or without sensor to replace high-cost turbo-pump.
2.    2. Connect to a glovebox to remove moisture  for battery research at lower cost  
3.    3. Connect to a Bridgman grower to synthesize metallic single crystal with Ar gas saving
4.    4. Connect with atmosphere controlled box furnace for sintering