Features | • Made of Stainless Steel with double high-temperature silicon O-rings on the flange. - • Stainless steel needle valve with 1/4" pipe adaptor.
- • The assembly kit will seal one end of 40mm / 42mm diameter ceramic and quartz tube.
- • Vacuum meter is installed in one side of flange.
- • MTI recirculating water chiller is an ideal tool for supplying cooling water to this flange set, please click the
- picture below for more detailed products information.
|
Vacuum level | |
Optional part | |
Installation Video |
|
Dimensions | (click to enlarge)
|
Warning | • Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You may order a ceramic block in related products.- • Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The
recommended torque is 35~40 inch-lbs. - • For liability considerations, MTI does not recommend or endorse the use of any toxic, flammable or corrosive
gases with our flange assemblies. Please contact us with any concerns.
|
Optional Accessories | Click here to choose flange for tube from 42mm to 11" Vacuum Pump & High Vacuum Station
|