Features |
• Made of Stainless Steel with double high-temperature silicon O-rings on flange. - • The KF-D16 and KF-D25 fitting ports were built on the flange.
- • Such assembly kit can seal one end of 100 mm diameter ceramic or quartz tube.
|
Applications |
• KF-D25 port can be connected to the SS high vacuum bellow via ball valve. Better sealing
effect and higher pumping rate can be achieved via this configuration.
|
Installation Video |
|
Demension |
 click to enlarge
|
Warning |
• Must put a refractory tube block in front of the flange (see picture below) to avoid heat
radiation melt silicone O-ring. You may order a ceramic block in related products.- • Please do not over tighten the three hex screws on the flanges to avoid overpressure
incidents. The recommended torque is 35~40 inch-lbs. - • For liability considerations, MTI does not recommend or endorse the use of any toxic,
flammable or corrosive gases with our flange assemblies. Please contact us with any
concerns.
|
