Dry Vacuum Pump | |
Mobile Cart |
• Cart Dimension: 600 mm (L) x 600 mm (W) x 600 mm ( H)
• 4 wheels mobile with brake • Four side panel is included and removable • Max. loading weight: 1000 lb
|
| Voltage / Frequency | 110V - 240VAC, 50/60Hz |
Pumping speed
| 3.7L/s |
Maximum Pressure |
• 2.2E-2 torr (3 Pa)
• Note:
• The ultimate vacuum level by the pump may vary from chamber to chamber in terms of size and sealing
condition.
|
| Power | 450W at ultimate pressure and 550W at atmosphere
|
| Max. helium leak rate | < 5E-7 mbar/s |
| Working Temperature | 12 ~ 40 0C |
Only Pump Weight (kg);
Dimension (mm) | 23Kg, 514 x 190 x 270mm (20.2 x 7.5 x 10.6") |
Flange |
• Flange in: KF25
• Flange out: KF16
|
Accessories Included |
• One 1 meter long SS below with KF25 adaptor- • Two quick clamps for KF25
|
Warranty |
• One year (Attention: Improper use will cause all claims for liability and warranties to be forfeited.
Improper use is deemed to be all use for purposes deviating from those mentioned in below,
especially:
- º Pumping of corrosive or explosive media.
- º Pumping of condensing vapors.
- º Pumping of liquids.
- º Pumping of dust.
- º Operation with improper high levels of insulated heat input.
- º Operation in potentially explosive areas.)
|
Application Notes |
• To protect the environment & human health, please use Traps & Filters to minimize exhaust. - • To protect vacuum pump from damage by condensed vapors or small particles, please connect a cold
trap or particle trap to the pump foreline (for more detail, please click on pic.1 or pic.2 to order). - • Please click pic.3 or pic.4 to order a vacuum gauge if needed.
   
pic.1 pic.2 pic.3 pic.4
|
| Compliance | CE approval |
Attentions & Notes |
• Before switching off, isolate the pump from the installation and let it run for 1 hour with gas
ballast opened. This "Pump Stop" procedure is very important in order to remove the
condensable vapors from the pump and, therefore, keep it healthy for the next run.- • The ultimate vacuum level achievable by the pump may vary according to the chamber size
and sealing condition.
|
