Induction Heating Power Source
| • Working Voltage: 220V AC, 50/ 60Hz, Three Phases (380VAC, 3phase available upon request)- • Working Current: 10~86 Amps (100A breaker required)
- • Max. Input Power: 25 KW
- • Output Frequency: 30 - 80 kHz
- • Duty Cycle: 100%
- • Induction Coil: 170mm(ID) x 110 mm(H)
- • Air Cooling: Rear Fan
- • Protection: Automatic water pressure, over temperature, and overpower protection
- • Refractory Assembling: Complete refractory assembling made of alumina, including bottom
crucible support, crucible holder, and cover
|
Melting Chamber ( Top)
| • the chamber is made of SS304 with water cooling jacket to ensure surface temperature < 60ºC.- • 10 bars ( 1 MPa)max. working pressure with a safety release valve and safety cover
- • High-quality fibrous alumina insulation.
- • > 116 L/minute cooling water is required to cool the induction coil. May click the picture below
to order one
|
Temperature Control
| • Precision temperature controller with 30 segments programmable- • Automatic PID control with the protection of over-temperature and thermal couple failure.
- • Thermal couple: B type
- • Working temperature range: 500℃~1600℃, 1700℃ Max. (<1hour ).
- • Temperature stability : +/- 5℃
- • Manual temperature control for the fast heating
- • 4℃/second(1000℃-1200℃)
- • 3℃/second(1200℃~1500℃)
- • 1℃~2℃/second (1500℃~1700℃)
|
Casting Chamber ( Bottom )
| • The bottom chamber is made of SS304 with KF 25 vacuum port- • Accommodates flasks 5'' diameters x 9" high is inside the bottom chamber to accept casting\
- • Vacuum requirement: 1bar (-29.9" Hg) at sea level
- • The digital vacuum gauge is included to monitor vacuum pressure
- • Double stage rotary vane vacuum pump is included with this casting system
|
Crucible
| • One set of high purity graphite crucible is included for max. 1000 g capacity ( Fe based alloy)- • The crucible bottom is sealed from the bottom chamber to keep high pressure
- • Thermal insulation component is included.
- • Graduating crucible and grain making tank is available at additional cost. for casting 1- 6 mm
sphere bead - • The customized graphite crucible is available upon request. Please contact MTI to get a quote
- •
|
Warranty | - • One year limited warranty with lifetime support
|
Compliance | • CE certified- • NRTL or CSA certification is available upon request.
|
Warning | • This is a high-pressure equipment! Must wear goggles when operating.- • Must use the pressure regulator to limit input gas pressure below 10 bars
-
|
Dimensions
|
|
Operation Video |
|
Net Weight
| 200kg |
Shipping Weight | 300kg |