Model | DZF-6020-ETL-110 | DZF-6020-CE-220 |
Chamber and Door
| • The chamber is structured with stainless steel and welded to bracing pieces.- • The Inner Chamber size: 300 mm x 295 mm x 275 mm (12 x 12 x 11", 25 Liter, 0.91 cu--ft )
- • A good vacuum sealing is achieved by the silicone gasket and the positive latch door.
- • The double layers observation window consists of 1/2" tempered glass and transparent polycarbonate
shield. - • Two stainless steel shelves are included to facilitate process efficiency.
- • An adjustable leak valve for venting is included.
|
Vacuum Level
| • Ultimate pressure with the 240 L/m mechanical pump only: < 50 mTorr (at 200 °C), 8 mTorr at R.T. after bake-out. - • Ultimate pressure with 33 L/s turbopump: 5E-5 Torr (at R.T.), 1 mTorr at 200 °C.
- • The vacuum pump is not included. Please order separately.
- • Double Stage Rotary Vane Vacuum Pump Recommended. Please click the pictures below to order
the pump.
|
Working Voltage | | |
Input Power | |
Working Temperature | - • RT+10 ~ 200°C for the continuous use
|
Temperature Controller
| • Single-point temperature setting- • Built-in over-temperature protection
- • PID precise temperature control
- • Temperature control accuracy: +/-1°C
- • Temperature uniformity: +/-5°C @ 100°C, 25" Hg at center 6" x 6" area only
|
Fittings
| |
Standard Package | |
Optional Accessories
| |
Dimensions | - • Oven: 580 x 472 x 450 mm (L x W x H)
|
Shipping Weight & Dimensions | - • 200 lbs 48" x 36" x 35"
|
Warranty | • One Year Limited Manufacturer Warranty with Life-Time Support (Note: the silicone door gasket is not covered by warranty)
|
Compliance | NTRL (ETL) Certificated | CE Certificated |
Operation Instruction |
|
Application Notes | • For accurate temperature measurement, you may do calibration by using the temperature calibrating kit. - • For more information on how to calibrate oven temperature, please review How to calibrate the oven.
- • An optional 4-pin electric feedthrough could be installed in the oven at an extra cost, which provides a
direct electric connection without breaking the vacuum. Please contact info@mtixtl.com for inquiries.
|
Attention | • It's normal that the SS chamber wall will be slightly deformed and lose its shiny surface during high- temperature operation under vacuum. However, this would not affect any performance.- • Please do not place the sample on the chamber bottom directly.
- • This product is not made by MTI but distributed for Shanghai Yiheng Manufacturer.
|