Power Input | - 208 - 240VAC, 50/60Hz, single phase
- 4000W in total
|
Spray Nozzles
| - Two spray nozzles are optional, which sprays slurry with a viscosity 300 - 500 CPS
- Compressive air spray nozzle for high viscosity thick film coating ( Pic 1 )
- High power ultrasonic spray head (compressed air-assisted Pic2) with 3000W 20Khz Generator(Pic2) for lower viscosity film ( higher cost )
- One digital FMC is included for delivery compressive gas in the constant pressure for spray nozzle. ( Pic 3)
(PiC 1 ) Pic 2 (Pic. 3) |
Syringe pump
| - Four Syringe pumps are included. Three for the solution to be mixed and coated and one for cleaning by DI water.
- Standard syringe capacity: 60 ml ( other capacity is available)
- Line speed range: 1 µm/min---120 mm/min adjustable
- Accuracy: ≦ ±0.5%(when >30% FS)
- Control: The syringe pumps are controlled by either self digital control panel or main touch screen control panel.
|
Solution Mixing
| - Three types of solutions will be mixed and dispersed in the small container before spraying.
- Container size: Φ25x100mm H(~ 50ml)
- Blade stirring Speed: 120 RPM
|
Vacuum Chamber
| - The chamber is made of stainless steel
- Chamber size: 650 x 600 x 500mm
- Max. Vacuum limit: 20 torrs by mechanical pump, which is included ( click Pic below right to see specs)
- One dual-stage mechanical pump is included
-
|
Processing Platform
| - The precision X-Y-Z travel mechanism is built inside the vacuum chamber, which will carry the spray nozzle to the desired position for coating locally.
- Travel Distance: ( X-Y axis ) 200 mm Max Z-axis: 60 mm Max.
- Travel Speed: 1mm/s - 12mm/s
- One set of substrate plates with a 36 cylinder mask is built in the bottom of the chamber.
- Standard cylinder mask size: 18 mm in diameter. Other sizes are available upon request.
- The heating plate is installed at the bottom of the substrate plate for pyrolysis treatment.
- Temperature Range: RT - 500ºC Max. ( < 30 minutes)
- Temperature Uniformity: ≤±5℃
- Optional heating plate with vacuum chuck (350L x 240W mm) is available upon request at the extra cost
|
Control Unit
| - 7" touchscreen control panel is installed on the front of the chamber, which programs and controls all parameters for spraying.
- Vacuum time and inert gas purging time is programmable.
- Flow rate and spraying time in three syringe pumps to each cylinder mask are programmable to form different compositions and make 36 position coating automatically.
- 128 recipes can be stored in the control panel to achieve a one-button operation automatically.
- Manual operation mode is available to achieve a coating point to point.
- PC operation software is available upon request at the extra cost
|
Dimension | 1100L x 730W x 1500 H, mm |
Net Weight | ~ 1000 Kg |
Warranty | - One year limited warranty with lifetime support (demo before purchase available)
|
Compliance | - CE certified
- NRTL certification is available upon request at the extra cost
|
Operation Demo Video | |
Warning | - The max pressure in the chamber is 0.02 Mpa. There is a pressure release valve is built in the chamber to protect overpressure.
|