Furnace Structure
| - W260 x D200 x H 120 mm (~10“x8"x5", ~6.2 L ) ceramic heating chamber is placed in a stainless steel vacuum chamber with graphite felt thermal insulation
- 25 mm dia quartz observation window is built-in on the front door
- KF 25 vacuum port and the valves of gas inlet and outlet are built in the vacuum chamber
- A mechanical vacuum gauge is included
- A digital temperature controller with 30 segments programmable is included
- The heating element of the Ni-Cr-Al resistance coil is hiden in a ceramic chamber to avoid corrosen
|
Power
| - 2.5 kW Max.
- AC 208V-240V, single phase, 50/60 Hz
- Note: A power cable is included without a plug. Please install a plug by yourself or click the link below the picture to choose a plug according to your country or your lab requirement
|
Working Temperature
| - A k-type thermal couple is included
- 30 segments programmable via a digital temperature controller
- <= 1000 °C continuously
- Max. 1050 °C, < 30 minutes
- Heating rate: ~ 7°C/ min Max under vacuum (10-2 Torr), 85% output.
- Temperature stability: +/- 1°C
- RS485 port and software is included for PC operation
- The furnace can be upgraded to 1200oC with different heating element and chamber
|
Vacuum level and Vacuum Pump
| - 10- 2 torr via a rotary mechanical pump ( cold condition ) Pic. 1
- 10-4 torr via turbopump (a cold condition with baking ) Puc. 2
- KF25 vacuum port and gas valves are included
- One mechanical vacuum gauge is included
- The vacuum pump is not included. Please click the link below to order separately
- Digital vacuum gauge up to 10-5 torr with KF16 port is optional ( Click Pic 3 to order )
- The "Gas Inlet" port located the back side is ued to flow gases into the chmaber (Pic. 4).
- Pic. 1 Pic. 2Pic. 3 Pic. 4
|
Crucibles (optional) | - You may click the link below to choose an alumina or quartz crucible
-
|
Overall Dimensions
| Click the picture to see details |
Net Weight | 48 kg |
Shipping Weight | 310 lbs |
Shipping Volume | 40"(L) x 30"(W) x36"(H) |
Warranty
| - One-year limited warranty with lifetime support
- ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
|
Compliance
| - CE Certified
- NRTL or CSA certification is available upon request at extra cost.
|
Operation Demo Video |
|