Features
| - Suitable for Cylinder Cell 4680 - 46120 Winding
- Roll to Roll Automatic Electrode Feeding/Loading
- Automatic Electrode Cutting off - Alignment - Winding - Taping and Manual Jelly Roll Unloading
- Guide Slot Positioning for Cathode & Anode Electrodes
- Winding Speed / Winding Length (Number of Winding) adjustable
- High Precision Separator Tension Control
- PLC Control / Touch Screen
|
Input Power | - Voltage: Single-phase 208 - 240 VAC, 50/60 Hz
- Power: 1,500 W
|
Compressed Air
| - Compressed air of 0.7 MPa is needed for the operation of this machine
- Please note the air compressor is not included. Please click the picture below to order one at MTI, or order it from your local hardware store
- Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
|
Cathode / Anode Feeding
| - Roll to Roll
- Jelly Roll Structure: Cathode-Separator-Anode-Separator (From Outside to Inside)
- Electrode Width Range: 30 - 95 mm Adjustable
- Thickness range: 100 - 300 μm
|
Separator Feeding | - Loading material: separator film rolls, such as polyethylene (PE) or polypropylene (PP)
- Length range: separator roll with a diameter < 250 mm
- Width range: 35 - 90 mm
- Thickness range: 9 - 100 μm
- High Precision Tension range: 0 – 4 N for both top and bottom separator films
|
Winding
| - Winding needle size: 3.5 mm OD
- Electrode winding size: 14 – 46 mm OD, 35 – 95 mm in length
- To wind an electrode core with a certain OD, a spreadsheet for calculating the needed number of turns and electrode sheet length can be downloaded here
- Winding speed: 0 – 300 rpm adjustable
- Winding precision: < 0.5 mm edge roughness
|
Taping
| - Roll diameter: 150 mm Max.
- When the winding is finished, the tape will be applied to the winding core and cut automatically.
|
Size | - 2,800 mm L x 1,700 mm W x 1,350 mm H
|
Net Weight | |
Warranty | - One-year limited warranty on lifetime support
- Rusting or damage due to improper storage conditions or maintenance is not covered by a warranty
|
Compliance | - CE Certified
- NRTL or CSA Certification is available upon request at extra cost
|
Operation Instruction & Video | |
Optional | |