Electric Pressurization
| - Power supply: DC 24V
- Power: 90W
- Maximum Pressure: 3T
- Maximum Stroke: 25mm
- Work surface size: Φ58mm
- Workspace: 260*130*430mm(L*W*H)
- Display range: 1.00-3000.00kg
- Control range: 30-3000kg (constant pressure accuracy: ±3kg)
- Pressure Dwelling Time: 1-9999min
- The equipment has two working modes: automatic pressurization and manual pressurization
- Three modes of automatic pressurization:
(1) Constant pressure mode: When the pressure value reaches the target value, in the process of pressure dwelling, the equipment continuously makes the pressure to maintain the pressure at the set value.
(2) Non-constant pressure mode: When the pressure value reaches the target value, the pressure is not replenished during the dwelling process.
(3) Intermittent constant pressure mode: When the pressure value reaches the target value, the pressure is replenished every 5 minutes during the packing process, and the pressure is maintained around the target value.
A low-cost press without a pressure recording function is also available for combination.
 
YLJ-15 YLJ-5TA
|
Solid-State Battery Testing Cell
(No Heating)
 | - The sleeve is made of PEEK or Nylon, which has high mechanical strength, high insulation, and strong corrosion resistance
- The upper and lower die cores are made of stainless steel, and a gold-plated pressure bar is optionally available
- The sleeve fixing ring is made of aluminum for great thermal conductivity
- Die diameter of ID· φ10mm (other core sizes are available upon request).
- A split test cell for pouch batteries is available upon request.
|
Solid-state Battery Testing Cell (Heating Condition)
| - If you would like a test cell under heating, please order the test cell made of Si3N4 ceramic as an option, which can be heated up to 500oC. Please click the picture below to see the details:
  - A Si3N4 heating die with an I.D. of 10 mm is included. Other sizes (eg. 12 mm, 20 mm) are also available upon request.
|
Temperature/Heating Control
| - A heating jacket is included for heating test cell
- Power supply: either 110 V or AC 220V can be chosen by the customer.
- Power: 550W
- Maximum heating temperature: 150 °C
- PID automatic temperature control system with 30-stage intelligent thermometer
- Built-in overheating protection and thermocouple fault alarm
- Accuracy: ±1 °C;
- Default DB9 PC communication connection port;
- MET certification;
- Optional computer temperature control software (for YD518P series controller) for controlling the heating curve and exporting data.
|
8-Channel Battery Analyzer
| - 8 channels battery analyzer ( 0.02 mA - 10 mA up to 5VDc)
- Each channel has an independent constant current source and constant voltage source, which can be programmed and controlled according to the scheme
- Software is included for displaying the curve of charging/discharging with temperature and pressure
|
Computer Software
(Optional) | - The software can display the temperature, pressure, and charge and discharge curves of solid-state batteries in real time on the same interface, which is more intuitive and can be exported to facilitate the comparison of multiple experiments
|
Operation Video |  |
